TS01 TW01 : Drylin® T Linear Bearings
Linear » Drylin Linear Slides & Rails »TS01 & TW01 Type : Drylin® T Linear Bearings with High Performance Polymers
| Discounts | 1+ 0% | 20+ 5% | 40+ 10% | 60+ 15% | 100+ 20% | 200+ 35% |
| Part Number Slide Rail |
Rail Length L |
1z mm4 |
1y mm4 |
b | K1 for Screw DIN 912 |
h1 | h | C6 Max. |
C6 Min. |
C5 Max. |
C5 Min. |
C4 | a-0.2 | Weight kg/m |
Cost | Quantity | Add to Basket |
| TS01-15-0500 | 500 | 4290 | 6440 | 22 | M4 | 10.0 | 15.5 | 49 | 20 | 49 | 20 | 60 | 15 | 0.6 | £76.43 |
|
|
| TS01-15-1000 | 1000 | 4290 | 6440 | 22 | M 4 | 10.0 | 15.5 | 49 | 20 | 49 | 20 | 60 | 15 | 0.6 | £152.88 |
|
|
| TS01-20-0500 | 500 | 11520 | 22570 | 31 | M5 | 12.3 | 19.0 | 49 | 20 | 49 | 20 | 60 | 20 | 1.0 | £90.65 |
|
|
| TS01-20-1000 | 1000 | 11520 | 22570 | 31 | M5 | 12.3 | 19.0 | 49 | 20 | 49 | 20 | 60 | 20 | 1.0 | £181.34 |
|
|
| TS01-25-0500 | 500 | 19300 | 34700 | 34 | M6 | 13.8 | 21.5 | 49 | 20 | 49 | 20 | 60 | 23 | 1.3 | £107.95 |
|
|
| TS01-25-1000 | 1000 | 19300 | 34700 | 34 | M6 | 13.8 | 21.5 | 49 | 20 | 49 | 20 | 60 | 23 | 1.3 | £215.90 |
|
|
| TS01-30-0500 | 500 | 40780 | 70040 | 40 | M8 | 15.8 | 26.0 | 59 | 20 | 59 | 20 | 80 | 28 | 1.9 | £115.56 |
|
|
| TS01-30-1000 | 1000 | 40780 | 70040 | 40 | M8 | 15.8 | 26.0 | 59 | 20 | 59 | 20 | 80 | 28 | 1.9 | £231.15 |
|
| Part Number Carriage |
K3 for Screw DIN 912 |
Nm Max. |
Thread K2 |
H5 | H1±0.35 | C3 | C2 | C1 | A2 | A1±0.35 | C Max. |
A | H±0.35 | Weight kg |
Cost | Quantity | Add to Basket |
| TW01-15 | M4 | 1.5 | M5 | 16.0 | 4.0 | 9 | 30 | 50 | 38 | 16.0 | 72 | 47 | 24 | 0.11 | £95.59 |
|
|
| TW01-20 | M5 | 2.5 | M6 | 19.8 | 5.0 | 10 | 40 | 61 | 53 | 21.5 | 95 | 63 | 30 | 0.19 | £97.17 |
|
|
| TW01-25 | M6 | 6.0 | M8 | 24.8 | 5.0 | 11 | 45 | 68 | 57 | 23.5 | 105 | 70 | 36 | 0.29 | £119.54 |
|
|
| TW01-30 | M8 | 15 | M10 | 27 | 6.5 | 12 | 52 | 79 | 72 | 31.0 | 118 | 90 | 42 | 0.50 | £128.47 |
|
Material
Slide Rail: Extruded Aluminium Construction
Material: Al Mg Si 0.5
Coating: Hard anodised, 50µm Hardness: 500HV
Slide Wagon: Basic Body: Aluminium, extruded profile
Construction Material:
Al Mg Si 0.5
Coating: Hard Anodised, 50 µm Hardness: 500HV
Slide Inserts: Maintenance-free sliding bearing material Iglidur® J
Screws and Springs: Galvanised Steel Cover: Plastic
Performance
Working Temperature Range: -40°C
to +90°C.
Max Sliding Speed: 10 m/s
Available in lengths up to 3960mm. P.O.A..
Downloads
PDF Documents : Catalogue Page | Technical | All Drylin® T Pages
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login