FK : Fixed Side Round Support Units
Linear » Ballscrews & Bearing Support Units »
FK : Fixed Side Round Type
| Discounts | 1+ 0% | 6+ 15% | 20+ 20% | 40+ 25% | 60+ 30% | 100+ 40% |
| Part Number |
Shaft Dia. d1 |
L | H | F | E | D | A | PCD | B | Mounting Method A |
Mounting Method B |
X | Y | Z | M | T | Bearing | Cost | Quantity | Add to Basket |
|||||
| L1 | T1 | L2 | T2 | ||||||||||||||||||||||
| FK05 | 5 | 16.5 | 6 | 10.5 | 18.5 |
|
34 | 26 | 26 | 5.5 | 3.5 | 7.0 | 5.0 | 3.4 | 6.5 | 4 | M2.6 | 11 | 605ZZ | £70.26 |
|
||||
| FK06 | 6 | 20.0 | 7 | 13.0 | 22.0 |
|
36 | 28 | 28 | 5.5 | 3.5 | 8.5 | 6.5 | 3.4 | 6.5 | 4 | M3.0 | 12 | 606ZZ | £70.26 |
|
||||
| FK08 | 8 | 23.0 | 9 | 14.0 | 26.0 |
|
43 | 35 | 35 | 7.0 | 4.0 | 10.0 | 7.0 | 3.4 | 6.5 | 4 | M3.0 | 14 | 608ZZ | £70.26 |
|
||||
| FK10 | 10 | 27 | 10 | 17 | 29.5 |
|
52 | 42 | 42 | 7.5 | 5 | 8.5 | 6 | 4.5 | 8.0 | 4 | M3 | 16 | - | £62.63 |
|
||||
| FK12 | 12 | 27 | 10 | 17 | 29.5 |
|
54 | 44 | 44 | 7.5 | 5 | 8.5 | 6 | 4.5 | 8.0 | 4 | M3 | 19 | - | £64.80 |
|
||||
| FK15 | 15 | 32 | 15 | 17 | 36.0 |
|
63 | 50 | 52 | 10.0 | 6 | 12.0 | 8 | 5.5 | 9.5 | 6 | M3 | 22 | - | £86.53 |
|
||||
| FK20 | 20 | 52 | 22 | 30 | 50.0 |
|
85 | 70 | 68 | 8.0 | 10 | 12.0 | 14 | 6.6 | 11.0 | 10 | M4 | 30 | - | £108.10 |
|
||||
| FK25 | 25 | 57 | 27 | 30 | 60.0 |
|
98 | 80 | 79 | 13.0 | 10 | 20.0 | 17 | 9.0 | 15.0 | 13 | M5 | 35 | - | £129.66 |
|
||||
| FK30 | 30 | 62 | 30 | 32 | 61.0 |
|
117 | 95 | 93 | 11.0 | 12 | 17.0 | 18 | 11.0 | 17.5 | 15 | M6 | 40 | - | £172.93 |
|
||||
Note: For light axial loads only, as bearing used is deep groove and not angular contact. Axial clearance is 0.03mm
Other Info.
Do not disassemble the support unit
When inserting a screw shaft into the support unit, take care to prevent peeling the oil-seal lip
The bearing is filled with grease
After inserting the fixed side support unit, lock the lock nut using the set piece and hexagon socket head setscrew
Minimum order value is £500 for non-stock items.
A further range suitable for use with C7 to C10 grade ballscrews is also available.
Please contact sales for further information.
Assembly consists of:
| Item No. |
Part Name |
Quantity |
| 1 | Housing | 1 |
| 2 | Bearing | 1 set |
| 3 | Holding Lid | 1 |
| 4 | Collar | 2 |
| 5 | Seal | 2 |
| 6 | Lock Nut | 1 set |
| 7 | Hexagon Socket Head Setscrew (with set piece) |
1 |
Downloads
PDF Documents : Catalogue Page | Technical
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login