Ondrives: Linear - Ballscrews & Bearing Support Units - GBS-Z

GBS-Z : Plain Economy Ballscrew Nuts

Linear » Ballscrews & Bearing Support Units »
GBS-Z Type : Plain Economy Ballscrew Nuts

Discounts

1+ 0%

6+ 15%

20+ 20%

40+ 25%

60+ 30%

100+ 40%

Part Number	To Fit Screw	Lead	D1 g6	D2	L1	L3	L4	L5	B x T	Dynamic Torque C (kN)	Static Torque Co (kN)	Weight (kg)	Cost	Quantity	Add to Basket
GBS-Z-2005RH	20	5	32	3.0	34	6.75	20	7.0	5 x 2.0	8.0	17.0	0.15	£149.59
GBS-Z-2505RH	25	5	38	3.0	34	6.75	20	7.0	5 x 2.0	9.5	22.4	0.20	£168.66
GBS-Z-3205RH	32	5	45	3.0	45	7.25	30	7.5	6 x 2.5	17.0	49.0	0.30	£223.41
GBS-Z-3210RH	32	10	53	3.0	60	10.00	30	15.0	6	25.7	56.0	0.60	£255.45
GBS-Z-4005RH	40	5	53	3.0	45	7.25	30	7.5	6 x 2.5	19.0	63.5	0.50	£237.76
GBS-Z-5010RH	50	10	72	4.0	82	11.00	36	23.0	6 x 2.5	55.0	153.0	1.10	£345.03
GBS-Z-6310RH	63	10	85	4.0	82	11.00	36	23.0	6 x 2.5	60.0	200.0	1.50	£922.15
GBS-Z-8010RH	80	10	105	4.0	82	11.00	36	23.0	8 x 2.1	69.0	260.0	2.10	£1434.83

Material
Steel 16 MnCr5 or 100Cr6.

Performance
Backlash: 0.05mm (5mm lead), 0.10mm (10mm lead).
For max loading and speeds: size, length of screw and end bearing configurations
will affect the load or speed the screw will be able to take.
Please contact Sales with usage data for further advice.

Other Info.
For use with KGS Ballscrews only.
Ensure you are able to fit the ballnut after machining by using the sleeve to keep the balls from dropping out of the nut.
Nuts supplied on sleeve. Balls may drop out if not correctly fitted to ballscrew or if sleeve removed.

Downloads
PDF Documents : Catalogue Page