Ondrives: Linear - Ballscrews & Bearing Support Units - SPUT-F - Square Type Support Unit Assembly (A End of PBST)

SPUT-F : Square Type Support Unit Assembly (A End of PBST)

Linear » Ballscrews & Bearing Support Units »
SPUT-F : Square Type Support Unit Assembly (for A End of PBST Ballscrew)

*Suits PBST miniature C3 precision ground ball screw end.

Discounts

1+ 0%

6+ 5%

20+ 10%

40+ 15%

60+ 20%

100+ 30%

Part Number	d1	L	L2	L3	L4	L5	C	H	h1	h2	A	B	B1	E	F	G	J	K	T	X	Y	Z	Bearing Number	Cost	Quantity	Order
SPUT-8F	8	20	3	4.0	10.0	-	52	32	17	26	13	25	25	38	4	10	4	23.0	5.5	6.6	11.0	12	708ADFP5	£184.73
SPUT-10F	10	24	6	5.5	12.0	-	70	43	25	35	17	36	36	52	4	15	6	29.5	6.6	9.0	14.0	11	7000ADFP5	£151.69
SPUT-12F	12	24	6	5.5	12.0	-	70	43	25	35	19	36	36	52	4	15	6	29.5	6.6	9.0	14.0	11	7001ADFP5	£158.27
SPUT-15F	15	25	6	12.0	12.5	-	80	50	30	40	21	41	40	60	4	15	5	38.0	6.6	11.0	17.5	15	7002ADFP5	£165.03
SPUT-20F	20	42	10	10.0	10.0	22	95	58	30	45	30	56	56	75	-	-	10	52.0	-	11.0	17.0	15	7204ADFP5	£230.93

Material
Housing: Steel (JIS 545C).

Other Info.
Do not disassemble Support Units adjusted on proper preload.
Bearings in Support Units are greased properly.
After having fastened shaft end with a lock nut, put a brass piece
into a drilled hole before tightening with a set screw slightly.

SPUT-F Assembly consists of:

Item No.	Part Name	Quantity	Remarks
1	Housing	1
2	Bearing	1 set	DF Spacing, P5 Precision Grade
3	Plate	1
4	Spacer	1
5	Lock Nut	1
6	Screw Thread	4	SPUT-8F	Machine Screw
6	Screw Thread	4	SPUT-10~20F	Hexagon Socket Head Cap Screw
7	Set Screw	1	with a Brass Piece
8	Oil Seal	2	(except SPUT-8F)

Downloads
PDF Documents : Catalogue Page