BLK : Transport Rolled Ballscrew - High Lead
Linear » Ballscrews & Bearing Support Units »BLK Type : Transport Rolled Ballscrew - High Lead C10 Accuracy (Non-Preloaded)
| Discounts | 1+ 0% | 6+ 15% | 20+ 20% | 40+ 25% | 60+ 30% | 100+ 40% |
| Part Number |
Outer Dia. D |
Flange Dia. D1 |
Overall Length L |
H | B1 | PCD | d1 | T | h | A | Seal M |
Axial Clearance |
Screw Shaft Dia. d |
Lead L |
Ball Centre-to-centre Dia. dp |
Thread Minor Dia. d3 |
No. of Loaded Circuits/Rows x Turns |
Basic Load Rating | Rigidity(1) K (N/µm) |
Screw Shaft Inertial Moment per mm (kg·cm2/mm) |
Cost | Quantity | Add to Basket |
|
| Ca (kN) Dyn |
C0a (kN) Stat |
|||||||||||||||||||||||
| BLK1510-500 | - | - | - | - | - | - | - | - | - | - | - | - | 15 | 10 | - | - | - | - | - | - | - | £541.14 |
|
|
| BLK1510-1000 | - | - | - | - | - | - | - | - | - | - | - | - | 15 | 10 | - | - | - | - | - | - | - | £600.99 |
|
|
| BLK1616-500 | 32 | 53 | 38 | 10 | 21.5 | 42 | 4.5 | 38 | 5.0 | M6 | 3.5 | 0.10 | 16 | 16 | 16.65 | 13.7 | 2 x 1.8 | 7.1 | 14.3 | 220 | 5.05 x 10-4 | £529.59 |
|
|
| BLK1616-1000 | 32 | 53 | 38 | 10 | 21.5 | 42 | 4.5 | 38 | 5.0 | M6 | 3.5 | 0.10 | 16 | 16 | 16.65 | 13.7 | 2 x 1.8 | 7.1 | 14.3 | 220 | 5.05 x 10-4 | £596.40 |
|
|
| BLK2020-500 | 39 | 62 | 45 | 10 | 27.5 | 50 | 5.5 | 46 | 5.0 | M6 | 3.5 | 0.10 | 20 | 20 | 20.75 | 17.5 | 2 x 1.8 | 11.1 | 24.7 | 290 | 1.23 x 10-3 | £580.28 |
|
|
| BLK2020-1000 | 39 | 62 | 45 | 10 | 27.5 | 50 | 5.5 | 46 | 5.0 | M6 | 3.5 | 0.10 | 20 | 20 | 20.75 | 17.5 | 2 x 1.8 | 11.1 | 24.7 | 290 | 1.23 x 10-3 | £653.95 |
|
|
| BLK2525-500 | 47 | 74 | 55 | 12 | 35.0 | 60 | 6.6 | 56 | 6.0 | M6 | 3.5 | 0.10 | 25 | 25 | 26.00 | 22.0 | 2 x 1.8 | 16.6 | 38.7 | 350 | 3.01 x 10-3 | £POA |
|
|
| BLK2525-1000 | 47 | 74 | 55 | 12 | 35.0 | 60 | 6.6 | 56 | 6.0 | M6 | 3.5 | 0.10 | 25 | 25 | 26.00 | 22.0 | 2 x 1.8 | 16.6 | 38.7 | 350 | 3.01 x 10-3 | £782.92 |
|
|
| BLK3232-500 | 58 | 92 | 70 | 15 | 45.0 | 74 | 9.0 | 68 | 7.5 | M6 | 3.8 | 0.14 | 32 | 32 | 33.25 | 28.3 | 2 x 1.8 | 23.7 | 59.5 | 440 | 8.08 x 10-3 | £POA |
|
|
| BLK3232-1000 | 58 | 92 | 70 | 15 | 45.0 | 74 | 9.0 | 68 | 7.5 | M6 | 3.8 | 0.14 | 32 | 32 | 33.25 | 28.3 | 2 x 1.8 | 23.7 | 59.5 | 440 | 8.08 x 10-3 | £1017.81 |
|
|
| BLK3636-500 | - | - | - | - | - | - | - | - | - | - | - | - | 36 | 36 | - | - | - | - | - | - | - | £POA |
|
|
| BLK3636-1000 | - | - | - | - | - | - | - | - | - | - | - | - | 36 | 36 | - | - | - | - | - | - | - | £1202.02 |
|
|
| BLK4040-500 | 73 | 114 | 85 | 18 | 56.5 | 93 | 11.0 | 84 | 8.5 | M6 | 5.4 | 0.17 | 40 | 40 | 41.75 | 35.2 | 2 x 1.8 | 38.7 | 99.2 | 550 | 1.97 x 10-2 | £POA |
|
|
| BLK4040-1000 | 73 | 114 | 85 | 18 | 56.5 | 93 | 11.0 | 84 | 8.5 | M6 | 5.4 | 0.17 | 40 | 40 | 41.75 | 35.2 | 2 x 1.8 | 38.7 | 99.2 | 550 | 1.97 x 10-2 | £1321.78 |
|
|
(1) The rigidity values in this table indicate spring constants obtained from the load and elastic displacement under an axial load of 30% of the basic dynamic load rating Ca. As these values do not take into account the rigidity of the parts involved in the nut installation, take 80% of the values given in this table as a general guideline.
If the preload Fa0 differs from 0.3 Ca, the rigidity KN can be calculated using the following equation:
| Fa0 | ||
| KN = K • | ------- | 1/3 • 0.8 |
| 0.1 Ca |
If the ballscrew is not preloaded, please consult our technical department for the rigidity value.
Material
All steel construction except end plates in a resin plastic.
End wipers are also in nitrile rubber.
Other Info.
High lead C10 (±0.21mm/300mm accuracy) rolled ballscrews.
Single nut with clearance. Ct5 precision rolled ballscrews are available P.O.A.
Max. running temperature 80°C. Axial play 14-28 = 0.1mm, 30-32 = 0.14mm, 36-45 = 0.17mm, 50-63 = 0.20mm.
Downloads
PDF Documents : Catalogue Pages | Technical | Machining Recommendations
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login