Ondrives: Gearboxes Reducers - Wormwheel Gearbox

PR6 6.5mm Centres 0.046Nm

Gearboxes Reducers » Wormwheel Gearbox »
PR6 Type : 4mm output shaft - 0.015Nm-0.046Nm - 10:1-30:1 Ratios

PR6 Miniature Worm Gear Reducers

Discounts

1+ 0%

6+ 5%

20+ 10%

50+ 15%

100+ 20%

Part Number	Ratio	Efficiency at 1000 Rpm	Reflected Inertia at Input (kg.m²)	Self Locking Output	Cost	Quantity	Add to Basket
PR6-1	1:1	82%	9.07 x 10^-9	Yes	£114.72
PR6-5	5:1	80%	9.18 x 10^-9	Yes	£114.72
PR6-10	10:1	78%	9.35 x 10^-9	No	£114.72
PR6-15	15:1	71%	1.03 x 10^-8	No	£114.72
PR6-30	30:1	60%	4.10 x 10^-8	No	£114.72

Material
Case: AA15 Red Anodised Aluminum (6082-T6)
Shafts: 303 Stainless Steel
Worm: High Carbon Steel 817M40 (40CrNiMo6)
Wheel: 817M40(EN24) Hardened

Nm output torque:

Ratio	1:1	5:1	10:1	15:1	30:1
Rpm Input
2000	0.015	0.015	0.015	0.015	0.015
1000	0.020	0.020	0.020	0.020	0.020
500	0.028	0.028	0.028	0.028	0.028
200	0.036	0.036	0.036	0.036	0.036
100	0.046	0.046	0.046	0.046	0.046

Performance
Weight: 0.032kg
Backlash: 2°
Max Input Speed: 4000 Rpm (short term)
Lubrication: Greased for life - Shell Gadus S5 V42P 2.5
Testing in your applications is necessary.
You will need to assess duty, cycles and confirm gearbox
suitability with your own calculations.
Torque figures are to be used for guidance only.
Other Info.
RH as standard

Downloads
DXF Drawings (Zip archived) : PR6
PDF Documents : Catalogue Page | Full Range of PR Gearboxes | General Gearbox Technical