DT90 : 20mm Shafts 103 Nm
Gearboxes Reducers » Spur Inline Planetary Gearbox »DT90 : DuraTRUE™ Low Backlash Planetary Gearhead - 20mm Dia Shaft - 103Nm
§AD = Adaptor length varies depending on motor.
For further information on Motor Mounting please contact our Technical department.
| Discounts | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% |
|
Part Number |
Ratio1 | 5000 Hour Life | Tpeak Nm |
10000 Hour Life | J Inertia kg–cm2 |
Torsional Stiffness Nm/arc–min |
Cost | Quantity | Add to Basket |
||||||
|
Tr (1000rpm) Nm |
Tr (2000rpm) Nm |
Tr (3000rpm) Nm |
Tr (4000rpm) Nm |
Tr (1000rpm) Nm |
Tr (2000rpm) Nm |
Tr (3000rpm) Nm |
Tr (4000rpm) Nm |
||||||||
| DT90-003 | 3:1 | 69 | 56 | 50 | 46 | 167 | 56 | 46 | 41 | 37 | 2.22 | 4.9 | £POA |
|
|
| DT90-005 | 5:1 | 75 | 62 | 55 | 50 | 157 | 62 | 50 | 45 | 41 | 1.76 | 4.8 | £POA |
|
|
| DT90-010 | 10:1 | 55 | 50 | 46 | 44 | 157 | 51 | 46 | 43 | 41 | 1.63 | 4.0 | £POA |
|
|
| DT90-015 | 15:1 | 93 | 84 | 79 | 74 | 167 | 86 | 74 | 66 | 60 | 1.78 | 4.9 | £POA |
|
|
| DT90-025 | 25:1 | 84 | 81 | 78 | 77 | 167 | 83 | 79 | 72 | 66 | 1.77 | 5.0 | £POA |
|
|
| DT90-030 | 30:1 | 103 | 93 | 88 | 84 | 167 | 95 | 86 | 81 | 74 | 1.64 | 4.9 | £POA |
|
|
| DT90-050 | 50:1 | 88 | 84 | 82 | 81 | 167 | 86 | 83 | 81 | 79 | 1.63 | 5.0 | £POA |
|
|
| DT90-100 | 100:1 | 75 | 69 | 65 | 63 | 167 | 69 | 64 | 60 | 58 | 1.63 | 4.4 | £POA |
|
|
Tr = Rated output torque at rated input speed for specified hours of life.
J = Mass moment of inertia reflected to the input shaft (including pinion assembly).
Ordering Info.
Please Specify the following when ordering:
1) Dimensions of motor used; 2) Input details; 3) Make and model number of motor used.
3:1 - 100:1 ratios available
| Ratio | L | Backlash (arc-min) |
Weight kg |
Efficiency |
| 3:1 to 10:1 | 67 | 8 max | 3.0 | 90% |
| 15:1 to 100:1 | 90 | 9 max | 3.7 | 85% |
Material
Housing: Anodized Aluminium
Gears: HRC 55-60 Steel
Bearings: Sealed deep groove ball bearings
Performance
Radial Load Capacity: Up to 2750N
Torque Capacity: Up to 103Nm
Backlash: Up to 9 arc-minutes
 |
|
 |
||||||||||||||
| Allowable radial load at a given distance (x) from the mounting surface based on a L10 life of 10,000 hours for the mean output speed. | ||||||||||||||||
Ordering Info.
Please Specify the following when ordering:
1) Dimensions of motor used; 2) Input details; 3) Make and model number of motor used.
Downloads
PDF Documents : Catalogue
Page | Full DuraTRUE™ Range of Planetary Gearheads
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login