DT60 : 16mm Shafts 28 Nm
Gearboxes Reducers » Spur Inline Planetary Gearbox »DT60 : DuraTRUE™ Low Backlash Planetary Gearhead - 16mm Dia Shaft - 28Nm
§AD = Adaptor length varies depending on motor.
For further information on Motor Mounting please contact our Technical department.
| Discounts | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% |
|
Part Number |
Ratio1 | 5000 Hour Life | Tpeak Nm |
10000 Hour Life | J Inertia kg–cm2 |
Torsional Stiffness Nm/arc–min |
Cost | Quantity | Add to Basket |
||||||
|
Tr (1000rpm) Nm |
Tr (2000rpm) Nm |
Tr (3000rpm) Nm |
Tr (4000rpm) Nm |
Tr (1000rpm) Nm |
Tr (2000rpm) Nm |
Tr (3000rpm) Nm |
Tr (4000rpm) Nm |
||||||||
| DT60-003 | 3:1 | 15 | 12 | 11 | 10 | 52 | 12 | 10 | 9 | 8 | 0.52 | 0.9 | £POA |
|
|
| DT60-005 | 5:1 | 17 | 14 | 12 | 11 | 46 | 14 | 11 | 10 | 9 | 0.46 | 0.9 | £POA |
|
|
| DT60-010 | 10:1 | 15 | 14 | 13 | 12 | 45 | 14 | 13 | 11 | 10 | 0.44 | 0.8 | £POA |
|
|
| DT60-015 | 15:1 | 25 | 20 | 18 | 16 | 52 | 20 | 16 | 14 | 13 | 0.46 | 0.9 | £POA |
|
|
| DT60-025 | 25:1 | 24 | 22 | 19 | 18 | 52 | 22 | 18 | 16 | 15 | 0.46 | 0.9 | £POA |
|
|
| DT60-030 | 30:1 | 28 | 25 | 22 | 20 | 52 | 25 | 20 | 18 | 16 | 0.44 | 1.0 | £POA |
|
|
| DT60-050 | 50:1 | 25 | 24 | 24 | 22 | 52 | 25 | 22 | 19 | 18 | 0.44 | 0.9 | £POA |
|
|
| DT60-100 | 100:1 | 20 | 19 | 18 | 17 | 51 | 19 | 17 | 16 | 16 | 0.44 | 0.9 | £POA |
|
|
1 = Ratios are exact, higher ratios are also available - please consult sales.
Tr = Rated output torque at rated input speed for specified hours of life.
J = Mass moment of inertia reflected to the input shaft (including pinion assembly).
Ordering Info.
Please Specify the following when ordering:
1) Dimensions of motor used; 2) Input details; 3) Make and model number of motor used.
3:1 - 100:1 ratios available
| Ratio | L | Backlash (arc-min) |
Weight kg |
Efficiency |
| 3:1 to 10:1 | 53 | 8 max | 1.0 | 90% |
| 15:1 to 100:1 | 70 | 9 max | 1.2 | 85% |
Material
Housing: Anodized Aluminium
Gears: HRC 55-60 Steel
Bearings: Sealed deep groove ball bearings
Performance
Radial Load Capacity: Up to 1800N
Torque Capacity: Up to 28Nm
Backlash: Up to 9 arc-minutes
 |
|
 |
||||||||||||||
| Allowable radial load at a given distance (x) from the mounting surface based on a L10 life of 10,000 hours for the mean output speed. | ||||||||||||||||
Ordering Info.
Please Specify the following when ordering:
1) Dimensions of motor used; 2) Input details; 3) Make and model number of motor used.
Downloads
PDF Documents : Catalogue
Page | Full DuraTRUE™ Range of Planetary Gearheads
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login