DTR60 : 16mm Shafts 32Nm
Gearboxes Reducers» Right Angle Bevel Gearbox »DTR60 : DuraTRUE 90™ Low Backlash Right Angled Gearhead - 16mm Dia Shaft - 32Nm
§AD = Adaptor length varies depending on motor.
For further information on Motor Mounting please contact our Technical department.
| Discounts | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% |
|
Part Number |
Ratio1 | 5000 Hour Life | Tpeak Nm |
10000 Hour Life | J Inertia kg–cm2 |
Torsional Stiffness Nm/arc–min |
Cost | Quantity | Add to Basket |
||||
|
Tr (1000rpm) Nm |
Tr (3000rpm) Nm |
Tr (5000rpm) Nm |
Tr (1000rpm) Nm |
Tr (3000rpm) Nm |
Tr (5000rpm) Nm |
||||||||
| DTR60-005 | 5:1 | 18 | 13 | 11 | 52 | 14 | 10 | 9 | 0.42 | 3.3 | £POA |
|
|
| DTR60-006 | 6:1 | 19 | 13 | 12 | 52 | 15 | 11 | 9 | 0.42 | 2.3 | £POA |
|
|
| DTR60-009 | 9:1 | 21 | 15 | 13 | 52 | 17 | 12 | 11 | 0.36 | 2.3 | £POA |
|
|
| DTR60-010 | 10:1 | 21 | 15 | 13 | 49 | 17 | 12 | 10 | 0.41 | 2.3 | £POA |
|
|
| DTR60-012 | 12:1 | 18 | 17 | 14 | 45 | 18 | 13 | 12 | 0.33 | 2.3 | £POA |
|
|
| DTR60-015 | 15:1 | 23 | 17 | 14 | 50 | 19 | 14 | 12 | 0.32 | 2.3 | £POA |
|
|
| DTR60-020 | 20:1 | 24 | 18 | 16 | 51 | 21 | 15 | 13 | 0.33 | 2.3 | £POA |
|
|
| DTR60-025 | 25:1 | 24 | 19 | 17 | 51 | 22 | 16 | 14 | 0.32 | 2.3 | £POA |
|
|
| DTR60-030 | 30:1 | 18 | 15 | 14 | 49 | 16 | 14 | 13 | 0.35 | 1.7 | £POA |
|
|
| DTR60-040 | 40:1 | 18 | 16 | 15 | 49 | 17 | 15 | 14 | 0.33 | 1.7 | £POA |
|
|
| DTR60-050 | 50:1 | 19 | 16 | 15 | 49 | 17 | 15 | 14 | 0.32 | 1.7 | £POA |
|
|
| DTR60-060 | 60:1 | 28 | 18 | 15 | 52 | 20 | 14 | 12 | 0.42 | 2.3 | £POA |
|
|
| DTR60-075 | 75:1 | 28 | 20 | 17 | 50 | 23 | 16 | 14 | 0.35 | 2.3 | £POA |
|
|
| DTR60-090 | 90:1 | 28 | 20 | 17 | 52 | 22 | 16 | 14 | 0.36 | 2.3 | £POA |
|
|
| DTR60-100 | 100:1 | 27 | 19 | 16 | 49 | 22 | 16 | 13 | 0.41 | 2.2 | £POA |
|
|
| DTR60-120 | 120:1 | 24 | 22 | 19 | 45 | 24 | 18 | 15 | 0.33 | 2.3 | £POA |
|
|
| DTR60-125 | 125:1 | 29 | 23 | 20 | 51 | 27 | 19 | 16 | 0.32 | 2.4 | £POA |
|
|
| DTR60-150 | 150:1 | 30 | 22 | 19 | 50 | 22 | 18 | 15 | 0.35 | 2.3 | £POA |
|
|
| DTR60-200 | 200:1 | 31 | 24 | 20 | 51 | 27 | 19 | 16 | 0.41 | 2.3 | £POA |
|
|
| DTR60-250 | 250:1 | 32 | 25 | 22 | 51 | 29 | 21 | 18 | 0.32 | 2.4 | £POA |
|
|
| DTR60-300 | 300:1 | 23 | 20 | 18 | 49 | 21 | 18 | 17 | 0.35 | 1.7 | £POA |
|
|
| DTR60-400 | 400:1 | 24 | 20 | 19 | 49 | 22 | 19 | 18 | 0.33 | 1.7 | £POA |
|
|
| DTR60-500 | 500:1 | 24 | 21 | 20 | 49 | 23 | 20 | 18 | 0.30 | 1.7 | £POA |
|
|
1 = Ratios are exact, higher ratios are also available - please consult sales.
Tr = Rated output torque at rated input speed for specified hours of life.
J = Mass moment of inertia reflected to the input shaft (including pinion assembly).
Ordering Info.
Please Specify the following when ordering:
1) Dimensions of motor used; 2) Input details; 3) Make and model number of motor used.
5:1 - 500:1 ratios available.
| Ratio | K | L | Backlash (arc-min) |
Weight kg |
Efficiency |
| 5:1 to 50:1 | 79 | 109.5 | 9 max | 2.5 | 90% |
| 60:1 to 500:1 | 96 | 127.0 | 9 max | 2.7 | 85% |
Material
Housing: Anodized Aluminium
Gears: HRC 55-60 Steel
Bearings: Deep groove ball bearings
Performance
Radial Load Capacity: Up to 1750N
Torque Capacity: Up to 32Nm
Max Backlash: 9 arc-minutes
 |
|
 |
||||||||||||||
| Allowable radial load at a given distance (x) from the mounting surface based on a L10 life of 10,000 hours for the mean output speed. | ||||||||||||||||
Ordering Info.
Please Specify the following when ordering:
1) Dimensions of motor used; 2) Input details; 3) Make and model number of motor used.
Downloads
PDF Documents : Catalogue
Page | Full Range of DuraTRUE™ Right Angled Gearheads
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login