DTR142 : 40mm Shafts 616Nm
Gearboxes Reducers » Right Angle Bevel Gearbox »DTR142 : DuraTRUE 90™ Low Backlash Right Angled Gearhead - 40mm Dia Shaft - 616Nm
§AD = Adaptor length varies depending on motor.
For further information on Motor Mounting please contact our Technical department.
| Discounts | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% |
|
Part Number |
Ratio1 | 5000 Hour Life | Tpeak Nm |
10000 Hour Life | J Inertia kg–cm2 |
Torsional Stiffness Nm/arc–min |
Cost | Quantity | Add to Basket |
||||
|
Tr (1000rpm) Nm |
Tr (3000rpm) Nm |
Tr (5000rpm) Nm |
Tr (1000rpm) Nm |
Tr (3000rpm) Nm |
Tr (5000rpm) Nm |
||||||||
| DTR142-005 | 5:1 | 433 | 311 | 267 | 833 | 352 | 253 | 217 | 13.9 | 47.4 | £POA |
|
|
| DTR142-006 | 6:1 | 454 | 329 | 282 | 833 | 372 | 267 | 229 | 13.8 | 38.6 | £POA |
|
|
| DTR142-009 | 9:1 | 444 | 372 | 319 | 833 | 420 | 302 | 259 | 11.8 | 39.1 | £POA |
|
|
| DTR142-010 | 10:1 | 448 | 363 | 311 | 833 | 410 | 295 | 253 | 13.7 | 40.6 | £POA |
|
|
| DTR142-012 | 12:1 | 319 | 319 | 319 | 798 | 319 | 319 | 282 | 10.9 | 39.3 | £POA |
|
|
| DTR142-015 | 15:1 | 463 | 410 | 351 | 833 | 453 | 333 | 285 | 10.7 | 39.4 | £POA |
|
|
| DTR142-020 | 20:1 | 473 | 432 | 383 | 833 | 462 | 363 | 311 | 10.8 | 40.9 | £POA |
|
|
| DTR142-025 | 25:1 | 399 | 399 | 399 | 833 | 399 | 388 | 333 | 10.6 | 40.9 | £POA |
|
|
| DTR142-030 | 30:1 | 268 | 228 | 134 | 833 | 248 | 211 | 195 | 11.7 | 35.6 | £POA |
|
|
| DTR142-040 | 40:1 | 279 | 240 | 221 | 833 | 258 | 221 | 204 | 10.8 | 35.6 | £POA |
|
|
| DTR142-050 | 50:1 | 287 | 247 | 228 | 833 | 266 | 228 | 211 | 10.6 | 35.6 | £POA |
|
|
| DTR142-060 | 60:1 | 592 | 429 | 368 | 833 | 486 | 348 | 299 | 13.8 | 40.8 | £POA |
|
|
| DTR142-075 | 75:1 | 557 | 493 | 423 | 833 | 544 | 400 | 343 | 11.7 | 40.6 | £POA |
|
|
| DTR142-090 | 90:1 | 579 | 484 | 415 | 833 | 547 | 393 | 337 | 11.8 | 38.6 | £POA |
|
|
| DTR142-100 | 100:1 | 584 | 473 | 405 | 833 | 534 | 384 | 329 | 13.7 | 40.2 | £POA |
|
|
| DTR142-120 | 120:1 | 416 | 416 | 416 | 798 | 416 | 416 | 368 | 10.9 | 39.0 | £POA |
|
|
| DTR142-125 | 125:1 | 480 | 480 | 480 | 833 | 480 | 467 | 400 | 10.6 | 40.9 | £POA |
|
|
| DTR142-150 | 150:1 | 603 | 534 | 458 | 833 | 590 | 433 | 372 | 11.7 | 40.6 | £POA |
|
|
| DTR142-200 | 200:1 | 616 | 563 | 499 | 833 | 602 | 473 | 405 | 13.6 | 40.8 | £POA |
|
|
| DTR142-250 | 250:1 | 520 | 520 | 520 | 833 | 520 | 505 | 433 | 10.6 | 40.9 | £POA |
|
|
| DTR142-300 | 300:1 | 349 | 298 | 174 | 833 | 323 | 275 | 254 | 11.7 | 35.6 | £POA |
|
|
| DTR142-400 | 400:1 | 363 | 312 | 287 | 833 | 336 | 288 | 266 | 10.8 | 35.6 | £POA |
|
|
| DTR142-500 | 500:1 | 374 | 321 | 298 | 833 | 346 | 297 | 275 | 10.1 | 35.6 | £POA |
|
|
1 = Ratios are exact, higher ratios are also available - please consult sales.
Tr = Rated output torque at rated input speed for specified hours of life.
J = Mass moment of inertia reflected to the input shaft (including pinion assembly).
Ordering Info.
Please Specify the following when ordering:
1) Dimensions of motor used; 2) Input details; 3) Make and model number of motor used.
5:1 - 500:1 ratios available.
| Ratio | K | L | Backlash (arc-min) |
Weight kg |
Efficiency |
| 5:1 to 50:1 | 160 | 231 | 9 max | 24 | 90% |
| 60:1 to 500:1 | 209 | 280 | 9 max | 28 | 85% |
Material
Housing: Anodized Aluminium
Gears: HRC 55-60 Steel
Bearings: Deep groove ball bearings
Performance
Radial Load Capacity: Up to 11000N
Torque Capacity: Up to 616Nm
Max Backlash: 9 arc-minutes
 |
|
 |
||||||||||||||
| Allowable radial load at a given distance (x) from the mounting surface based on a L10 life of 10,000 hours for the mean output speed. | ||||||||||||||||
Ordering Info.
Please Specify the following when ordering:
1) Dimensions of motor used; 2) Input details; 3) Make and model number of motor used.
Downloads
PDF Documents : Catalogue
Page | Full Range of DuraTRUE™ Right Angled Gearheads
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login