MAX38 : Motor-gearhead - 6mm dia Shafts 0.6Nm
Gearboxes Reducers » DC Motors & DC Motor-Gearheads »MAX38 Type : DC Motor Gearhead 18:1 - 900:1 Ratio : 6 Dia. Output Shaft : Upto 0.6 Nm
| Discounts | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% |
| Part Number |
Ratio | No.
of Stages |
Length L |
Continuous Torque (Nm) |
Peak Torque (Nm) |
Max Speed (Rpm) |
Efficiency | Average Backlash |
Cost | Quantity | Add to Basket |
| MAX110453 | 18:1 | 3 | 23.2 | 0.2 | 0.6 | 5000 | 73% | 3° | £54.19 |
|
|
| MAX110454 | 30:1 | 3 | 23.2 | 0.2 | 0.6 | 5000 | 73% | 3° | £54.19 |
|
|
| MAX110455 | 60:1 | 4 | 25.7 | 0.6 | 1.8 | 5000 | 66% | 3° | £54.19 |
|
|
| MAX110456 | 100:1 | 4 | 25.7 | 0.6 | 1.8 | 5000 | 66% | 3° | £58.64 |
|
|
| MAX110457 | 200:1 | 5 | 28.2 | 0.6 | 1.8 | 5000 | 59% | 3° | £58.64 |
|
|
| MAX110458 | 500:1 | 6 | 30.7 | 0.6 | 1.8 | 5000 | 53% | 3° | £58.64 |
|
|
| MAX110459 | 900:1 | 6 | 30.7 | 0.6 | 1.8 | 5000 | 53% | 3° | £58.64 |
|
Performance
38mm spur steel gearhead supplied with fitting kit to suit Size 40 motors, sleeve bearing output.
Maximum Axial Load: 30N, Maximum Radial Load at 5mm from Bearing: 50N,
Operating Temperature Range: -5°C to +65°C, Mass: 60-75g.
Usable output torque depends on torque from motor.
Downloads
PDF Documents : Catalogue Pages
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login