MAX16 : Motor-gearhead - 3mm dia Shafts 0.3Nm
Gearboxes Reducers » DC Motors & DC Motor-Gearheads »MAX16 Type : DC Motor Gearhead 19:1 - 1621:1 Ratio - 3 Dia. Output Shaft - Upto 0.3 Nm
| Discounts | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% |
| Part Number |
Ratio | No.
Stages |
Length L |
Continuous Torque (Nm) |
Peak Torque (Nm) |
Max Speed (Rpm) |
Efficiency | Average Backlash |
Cost | Quantity | Add to Basket |
| MAX110322 | 19:1 | 2 | 19.2 | 0.15 | 0.225 | 6000 | 81% | 0.8° | £66.10 |
|
|
| MAX110323 | 84:1 | 3 | 22.8 | 0.20 | 0.300 | 6000 | 73% | 1.0° | £61.31 |
|
|
| MAX110324 | 370:1 | 4 | 26.4 | 0.25 | 0.375 | 6000 | 65% | 1.2° | £64.51 |
|
|
| MAX110325 | 1621:1 | 5 | 30.0 | 0.30 | 0.450 | 6000 | 59% | 1.5° | £69.07 |
|
Performance
16mm planetary steel gearhead supplied
with fitting kit to suit Size 16
motors, sleeve bearing output.
Maximum Axial Load: 8N, Maximum Radial Load at 6mm from Flange:
2 Stage = 15N, 5 Stage = 20N,
Operating Temperature Range: -15°C to +65°C, Mass: 23-35g.
Usable output torque depends on torque from motor.
Downloads
PDF Documents : Catalogue Pages
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login