MAX16 : Motor - 1.5mm dia Shafts 2.23mNm
Gearboxes Reducers » DC Motors & DC Motor-Gearheads »MAX16 Type : 6 & 12 Volt DC Motors : 1.5 Dia. Motor Shaft : 2.26 - 2.23 mNm
| Discounts | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% |
| Part Number |
Voltage (DC) |
Power (W) |
Max. Cont. Current (mA) |
No Load Speed (Rpm) |
Stall Torque (mNm) |
Continuous Torque (mNm) |
No Load Current (mA) |
Torque Constant (mNm/A) |
Cost | Quantity | Add to Basket |
| MAX110044 | 6V | 2 | 328 | 8133 | 3.2 | 2.26 | 10.0 | 6.89 | £55.37 |
|
|
| MAX110048 | 12V | 2 | 154 | 7933 | 3.0 | 2.23 | 4.6 | 14.40 | £55.37 |
|
Performance
Operating Temperature Range: -30°C to +85°C (Max. rotor temperature +85°C). Mass: 21g.
Features
A range of high quality ironless DC motors offering a high output power within a very small frame size,
the ironless construction offers:-
• Low inductance - much longer brush life and low electrical noise
• Low inertia - low mechanical time constant for fast acceleration and high speed stability
• High efficiency - low current consumption, ideal for battery powered applications
• Linear speed torque characteristics - simple accurate control ideal for servo applications
• Precious metal brush commutation system guaranteeing consistent and low contact resistance
• CLL disc fitted on the precious metal brush motors - Reduces arching between the brushes and commutator, the main cause of brush wear on precious metal brush motors, thereby increasing operating life and reducing electrical noise.
Downloads
PDF Documents : Catalogue Pages
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login