Ondrives: Gearboxes Reducers - DC Motors & DC Motor-Gearheads - DUN80

DUN80 : Motor-gearhead - 19mm dia Shafts 60Nm

Gearboxes Reducers » DC Motors & DC Motor-Gearheads »
DUN80 Type : 24 & 40 Volts DC Motor & Gearbox Combinations : 19 Dia. Output Shaft : 1.2 - 60 Nm

Discounts

1+ 0%

Part Number	Ratio	No. of Stages	L1 (mm)	L2 (mm)	Speed With Load (Rpm)	Nominal Torque (Nm)	Rated Current (A)	Cost	Quantity	Order
DUN80x80-004	4.00:1	1	257	175	800.00	2.00	10	£609.57
DUN80x80-016	16.00:1	2	289	175	200.00	7.50	10	£695.82
DUN80x80-023	23.20:1	2	289	175	137.93	10.90	10	£695.82
DUN80x80-033	33.64:1	2	289	175	95.12	15.80	10	£695.82
DUN80x80-064	64.00:1	3	321	175	57.00	27.52	10	£778.36
DUN80x80-092	92.80:1	3	321	175	34.48	40.00	10	£778.36
DUN80x80-134	134.56:1	3	321	175	23.78	57.90	10	£778.36

Gear Material
Input Stage: Steel or Tufnol
Output Stage: Steel

Performance
Torque: 1.2Nm to 60Nm, Commutation: Graphite, No. of Sectors: 12,
Magnets: Ferrite, Gearbox Type: Planetary, Gearbox Bushes: Rotary,
No. of Stages: 1 - 2 - 3, Efficiency per Stage: 80% - 75% - 70%, Angular Backlash: <=0.4°,
Maximum Axial Load: 1000N, Maximum Radial Load at 25mm: 600N,
Operating Temperature Range: -15°C to +100°C, Mass: 4.3 to 6.3kg.

Other Info.
Performance data is based upon an operating temperature of 25°C
The DUN80 Type is also available as a motor only version.

Downloads
PDF Documents : Catalogue Page