DUN63X : Motor - 8mm dia Shafts 0.27Nm
Gearboxes Reducers » DC Motors & DC Motor-Gearheads »DUN63X Type : 24 Volt DC Motor - 8 Dia. Output Shaft - 0.14-0.27 Nm
| Discounts | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% | 1+ 0% |
| Part Number |
Voltage | No Load Speed Rpm |
No Load Current (mA) |
Nominal Current (A) |
Max. Efficiency |
L | Nominal Torque (Nm) |
Nom. Speed (Rpm) |
Moment of Inertia (gcm3) | Cost | Quantity | Add to Basket |
| DUN63x55-12 | 12 | 3500 | 800 | 8.70 | 80.5% | 125 | 0.24 | 3000 | 750 | £133.75 |
|
|
| DUN63x55-24 | 24 | 3650 | 400 | 4.90 | 80.0% | 125 | 0.27 | 3350 | 750 | £133.75 |
|
|
| DUN63x55-40 | 40 | 3600 | 280 | 2.95 | 82.0% | 125 | 0.27 | 3450 | 750 | £133.75 |
|
Performance
Voltage: 24 Volts DC, Commutation: Graphite, No. of Sectors: 12,
Brushes: Rotary, Magnets: Ferrite, Axial Backlash: <0.15mm, Radial Backlash: <0.15mm,
Maximum Axial Load: 150N, Maximum Radial Load at 20mm: 150N, Maximum Shaft Push Pressure: 200N,
Operating Temperature Range: -20°C to +85°C, Mass: 1.2 to 1.7kg.
Other Info.
Performance data is based upon an operating temperature of 25°C
The DUN63 Type is also available with a selection of gearbox combinations.
Downloads
PDF Documents : Catalogue Page
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login