Part Number	Thread	Hex A/F	B	Load Rating kg*	Torque Nm¶	Cost	Quantity	Add to Basket
HEX NUTS
FHN-706	M6	22.5	14.5	940	10.78	£11.61
FHN-708	M8	26.0	16.0	2925	16.92	£12.80
FHN-710	M10	26.0	16.0	3915	26.57	£12.80
FHN-712	M12	35.0	28.5	4005	51.78	£16.68
FHN-716	M16	35.0	28.5	4095	74.95	£16.68

Material
Carbon steel, black oxide finish

Other Info.
Button Thread® nuts allow quick fixturing on long thread lengths.
Simply press the button and the threads are disengaged
to allow easy movement up or down the screw.
Release the button and the threads engage for normal turning.
* Threaded mandrels were installed into the button thread nuts
and the force required to pull the mandrel through the nut is shown above.
¶ Samples torque tested to failure on a case hardened threaded mandrel.
Ondrives recommends the use of Button Thread fasteners
on low to medium load applications.
Repeated use on heavy loads may cause thread failure to occur.

Part Number	Thread	Hex A/F	A	B	C	Load Rating kg*	Torque Nm¶	Cost	Quantity	Add to Basket
COLLAR NUTS
FCN-706	M6	22.5	Ø26.0	16.0	3.5	940	10.78	£11.61
FCN-708	M8	26.0	Ø32.0	20.5	4.5	2925	16.92	£12.80
FCN-710	M10	26.0	Ø32.0	20.5	4.5	3915	26.57	£12.80
FCN-712	M12	35.0	Ø41.5	28.5	6.5	4005	51.78	£16.68
FCN-716	M16	35.0	Ø41.5	28.5	6.5	4095	74.95	£16.68
KNURLED NUTS
FKN-706	M6	-	Ø26.0	14.5	-	940	10.78	£11.05
FKN-708	M8	-	Ø28.0	19.0	-	2925	16.92	£12.18
FKN-710	M10	-	Ø28.0	19.0	-	3915	26.57	£12.18
FKN-712	M12	-	Ø38.0	28.5	-	4005	51.78	£15.93
FKN-716	M16	-	Ø38.0	28.5	-	4095	74.95	£15.93

Downloads
PDF Documents : Catalogue Page

Button Thread® Clamping Levers also available