• Welcome
• Gearboxes / Reducers
• Precision Gears
• Commercial Gears
• Pulleys, Belts & Sprockets
• Couplings
• Linear
• Bearings
• Fasteners
• Shoulder Screws
• Cap Screws
• Raised Head Screws
• Countersunk Head Screws
• Security Screws
• Set Screws
• Ventilation Screws
• Special Material Fasteners
• Threaded Spacers & Pillars
• Threaded Bar
• Nuts
• N : Steel Hex Full Nuts
• SHN : Stainless Hex Full Nuts
• NIN : M2.5-M36 Nyloc Nuts
• ST-LCTW : M4-M30 (Coarse Pitch) Staytite Nuts
• ST-LCTFW : M10-M30 (Fine Pitch) Staytite
• ST-A2TC : M4-M30 (Coarse Pitch) Staytite
• ST-A2FC : M10-M30 (Fine Pitch) Staytite
• HL-HCW : M8-M30 (Coarse Pitch) Hardlock
• HL-A2-C : M6-M30 (Coarse Pitch) Hardlock
• HL-HCFW : M8-M30 (Fine Pitch) - Hardlock
• HL-A2-FC : M8-M30 (Fine Pitch) Hardlock
• DIS-NU : M6-M16F Disk-Lock
• AIR : M2.5-M12 Aerotight
• FHN FCN FKN : M6-M16 Button Thread
• B : M3-M12 Barb Nuts
• C - M3-M12 Carp Nuts
• HXLM : M2.5-M36 Hex Lock Nuts
• DOM : Dome Nuts
• WING : Wing Nuts
• PN PWN : Nylon Hex Nuts & Hex Washer Nuts
• DOMB PWING : M3-M10 Nylon Dome & Wing Nuts
• Washers
• Plugs, Caps & Seals
• Threaded Inserts
• Anti-Vibration
• Springs
• Mechanical

• British Pounds Sterling US Dollars Euros
• 
• 
• 
• 
• 
• 
• 
• 
• 

AIR : M2.5-M12 Aerotight

Part Number Thread Pitch A/F Max. ØN Max. H Max. F Min. Cost Quantity Add to Basket A1 (303) Stainless Steel AIR-M2.5 M2.5 0.45 5.00 4.75 2.97 1.49 £1.53 AIR-M3 M3 0.50 5.50 5.25 3.52 1.89 £1.42 AIR-M4 M4 0.70 7.00 6.65 4.79 2.69 £1.42 AIR-M5 M5 0.80 8.00 7.65 6.02 3.49 £2.22 AIR-M6 M6 1.00 10.00 9.58 7.95 4.63 £2.40 AIR-M8 M8 1.25 13.00 12.53 10.00 6.12 £3.15 AIR-M10 M10 1.50 17.00 16.53 12.03 7.62 £4.39 AIR-M12 M12 1.75 19.00 18.47 14.48 9.62 £6.49

Part Number Thread Pitch A/F Max. ØN Max. H Max. F Min. Cost Quantity Add to Basket A4 (316) Stainless Steel AIR-M4S M4 0.70 7.00 6.65 4.79 2.69 £2.45 AIR-M6S M6 1.00 10.00 9.58 7.95 4.63 £3.45 AIR-M8S M8 1.25 13.00 12.53 10.00 6.12 £5.60 AIR-M10S M10 1.50 17.00 16.53 12.03 7.62 £7.80 AIR-M12S M12 1.75 19.00 18.47 14.48 9.62 £10.39

Material
Stainless Steel A1 (303) & A4 (316)

Other Info.
The material is ideal for manufacturing fasteners where it is essential that the application should last a considerable length of time therefore minimising maintenance, especially on exterior work.
Can be used for outdoor applications in coastal and industrial areas where atmospheric corrosion is severe.
Suitable for use in the chemical, photographic, food and horticultural industries. For paper processing, film processing and textile machinery. BS3613 Class 6H.
Recommended Practices: Aerotight nuts should not be used on damaged or interrupted threads.
When assembled on the screw at least two threads should protrude through the Aerotight nut.
Advantages: Will not work loose. No other locking device needed.
Nuts will stay put in any position whether tightened down or not, provided the locking element is engaged.
Can be re-used many times.
Available in Steel, austenitic Stainless Steel or Brass.
Can be used up to a temp. of 300°C.
Nuts have no vulnerable inserts to be affected by heat.

Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited.
Any company infringing the registered trade mark may be liable to legal proceedings.

Downloads
PDF Documents : Catalogue Page

Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™  |  Login