Ondrives: Couplings - Universal Joints

B22 RME : Precision Single

Couplings » Universal Joints »
B22 & RME Type : Steel and Stainless Precision Single Universal Joints : 0mm-55mm bores

B22 RME Single Precision Universal Joints

Discounts

1+ 0%

6+ 10%

30+ 20%

50+ 30%

100+ 35%

200+ 38%

300+ 40%

500+ 42%

1000+ 58%

Part Number		L	ØD	C	Max ØB	Max ØB & Key	Steel Elastic Limit Nm	Stainless Elastic Limit Nm	Cost Steel	Quantity	Add to Basket	Cost Stainless	Quantity	Add to Basket
Steel	Stainless	L	ØD	C	Max ØB	Max ØB & Key	Steel Elastic Limit Nm	Stainless Elastic Limit Nm	Cost Steel	Quantity	Add to Basket	Cost Stainless	Quantity	Add to Basket
B2201	RME-16	58	16	19	10	8	40	19	£54.29			£123.23
B2211	RME-20	64	20	19	13	11	80	52	£55.07			£134.94
B2210	RME-25	86	25	26	16	14	124	87	£59.65			£143.75
B2220	RME-32	95	32	28	22	18	260	182	£73.38			£173.15
B2230	RME-40	108	40	30	25	22	576	400	£88.08			£225.96
B2240	RME-45	127	45	36	30	25	926	648	£112.26			£290.47
B2250	RME-50	140	50	41	35	30	1186	830	£186.27			£378.56
B2260	RME-63	178	63	52	45	35	1920	1344	£248.68			£533.95
B2280	-	190	80	55	50	45	3840	-	£55.07			-	-	-

Material
B22 : Steel (EN16T) 605 M36
RME : Stainless Steel 316

Performance
Max Speed: 700 Rpm
Backlash Guide at Pin:0.08 to 0.13mm
Max Angular Offset (B22 & RME): 25°(35° hand op.)
Torque Capacity - Always use Elastic Limit: 700 Rpm x 25° times elastic limit by 0.04
100 Rpm x 25° times by 0.26
700 Rpm x 10° times by 0.12
100 Rpm x 10° times by 0.68
Factors affecting performance
Temperature, Load, Speed, Angle of Transmission, Continuous or intermittent running, Lubrication, Other changes in working conditions.
Grease Retaining Covers should be fitted for maximum performance.

Extras
Bores, keyways, hexagons, squares available.
Special materials also available; Aluminium, aerospace grades, etc.

Other Info.
Minimum order quantities may apply to other sizes subject to manufacturing preferences and production.

Downloads
PDF Documents : Catalogue Page