Ondrives: Couplings - Universal Joints - B23 & RMF - Precision Double

B23 RMF : Precision Double

Couplings » Universal Joints »
B23 & RMF Type : Steel and Stainless Precision Double Universal Joints : 0mm-55mm bores

B23 RMF Double Precision Universal Joints

Discounts

1+ 0%

6+ 10%

30+ 20%

50+ 30%

100+ 35%

200+ 38%

300+ 40%

500+ 42%

1000+ 58%

Part Number		L	ØD	C	E	R	Max ØB	Max ØB & Key	Steel Elastic Limit Nm	Stainless Elastic Limit Nm	Cost Steel	Quantity	Add to Basket	Cost Stainless	Quantity	Add to Basket
Steel	Stainless	L	ØD	C	E	R	Max ØB	Max ØB & Key	Steel Elastic Limit Nm	Stainless Elastic Limit Nm	Cost Steel	Quantity	Add to Basket	Cost Stainless	Quantity	Add to Basket
B2301	RMF-16	83	16	16.0	25	28.0	10	8	40	19	£119.35			£POA
B2311	RMF-20	92	20	18.0	30	31.0	13	11	80	52	£122.73			£290.47
B2310	RMF-25	122	25	25.0	36	43.0	16	14	124	87	£139.70			£325.63
B2320	RMF-32	143	32	27.5	47	47.5	22	18	260	182	£188.68			£387.23
B2330	RMF-40	164	40	30.0	56	54.0	25	22	576	400	£210.33			£510.43
B2340	RMF-45	190	45	33.5	63	63.5	30	25	926	648	£255.15			£633.61
B2350	RMF-50	210	50	45.0	70	70.0	35	30	1186	830	£315.48			£836.09
B2360	RMF-63	262	63	52.0	84	89.0	45	35	1920	1344	£421.61			£1100.28
B2370	-	322	75	69.0	100	111.0	55	45	3840	-	£977.81			-	-	-

Material
B23 : Steel (EN16T) 605 M36
RMF : Stainless Steel 316

Performance
Max Speed: 700 Rpm
Backlash Guide at Pin:0.08 to 0.13mm
Max Angular Offset: 50°(70° hand op.)
Torque Capacity -Always use Elastic Limit:
700 Rpm x 25° times elastic limit by 0.04
100 Rpm x 25° times elastic limit by 0.26
700 Rpm x 10° times elastic limit by 0.12
100 Rpm x 10° times elastic limit by 0.68
Factors affecting performance
Temperature, Load, Speed, Angle of Transmission, Continuous or intermittent running, Lubrication, Other changes in working conditions.
Grease Retaining Covers should be fitted for maximum performance.

Extras
Bores, keyways, hexagons, squares available.
Special materials also available; Aluminium, aerospace grades, etc

Other Info.
Minimum order quantities may apply to other sizes subject to manufacturing preferences and production.

Downloads
PDF Documents : Catalogue Page