Ondrives: Couplings - Spider Couplings - A-PB : Standard Elastomeric 4-96mm Bores

A-PB : Standard Elastomeric Couplings 8-96mm Bores

Couplings » Spider Couplings »
A-PB : Standard Elastomeric Couplings 8-96mm Bores

A-PB Elastomeric Couplings

Discounts

1+ 0%

6+ 10%

16+ 15%

41+ 20%

100+ 25%

200+ 30%

400+ 35%

Part Number	Max Bore d1	Pilot Bore	D1	D2	D3	d2	G	L	Std. "DBSE"	Hub Gap E	H	J	Cost	Quantity	Add to Basket
A0-PB	34.9	8	65	52	52	32	73	28	17	1.5	-	-	£50.64
A1-PB	41.3	14	83	65	65	39	91	34	23	1.5	-	-	£77.35
A2-PB	53.9	17	111	80	86	45	127	47	33	2.5	55	36	£137.47
A3B-PB	69.8	19	144	105	116	52	156	56	44	2.5	65	45	£253.98
A4B-PB	95.2	24	182	135	150	70	180	63	54	3.5	85	47	£436.92
A45-PB	82.5	25	202	125	170	90	198	70	58	3.5	93	52	£555.90
A5B-PB	114.3	29	225	160	190	89	216	77	62	3.5	101	57	£740.99
A55-PB	101.6	30	250	155	215	115	246	90	66	3.5	109	68	£740.79
A6-PB	114.3	39	265	180	233	112	260	95	70	3.5	119	70	£894.95
A7-PB	139.7	48	306	205	267	135	310	116	78	4.0	134	88	£1442.94
A8-PB	150.0	63	363	242	326	157	382	147	88	5.0	154	114	£2226.70
A9-PB	180.0	73	425	280	385	188	420	162	95	5.0	162	129	£3856.59
A10-PB	210.0	96	523	330	483	218	482	188	106	6.0	192	145	£6433.50
A11-PB	210.0	96	503	350	458	216	512	190	132	6.0	216	148	£POA

Part Number	STD Insert		HD Insert		Technical Data			Displacement Values
Part Number	Max. KW per 1000	Max. Cont. Torque Nm	Max. KW per 1000	Max. Cont. Torque Nm	Max Speed Unbal.	Max Speed Bal.	Moment of Inertia kg-m²	Weight Kg	Axial Tolerance	Radial/ Parallel	Angular Tolerance
A0	6.00	56.9	-	-	8200	9000	-	1.0	+0.3	0.10	2.0
A1	11.00	107.0	15	142	7250	8000	0.0012	1.8	+0.5	0.10	2.0
A2	30.00	286.0	40	377	5440	6500	0.0050	3.8	+0.5	0.10	2.0
A3B	60.00	569.0	78	740	4200	4800	0.0200	8.5	+0.7	0.15	2.0
A4B	120.00	1139.0	163	1545	3275	3600	0.0750	16.0	+0.8	0.20	1.3
A45	212.00	2014.0	275	2605	2800	3100	0.1020	19.0	+1.0	0.20	1.3
A5B	303.00	2876.0	398	3772	2600	2900	0.2100	31.0	+1.0	0.20	1.3
A55	358.00	3400.0	475	4500	2350	2600	0.2750	36.0	+1.0	0.20	1.3
A6	485.00	4598.0	658	6242	2200	2500	0.4370	47.0	+1.0	0.20	1.3
A7	966.00	9168.0	1170	11104	1900	2200	0.8250	75.0	+1.0	0.30	1.0
A8	1815.00	17225.0	2205	20926	1600	1850	2.3260	137.0	+1.5	0.30	1.0
A9	3023.00	28684.0	3510	33311	1350	1600	4.9500	218.0	+1.5	0.30	1.0
A10	4845.00	45981.0	5663	53739	1100	1250	12.0000	350.0	+2.0	0.40	1.0
A11	5895.00	55945.0	7920	75163	1100	1250	16.0000	410.0	+2.0	0.40	1.0

Material
Hub: Cast iron
Insert: Yellow polyurethane, 95 shore hardness
Holding Ring: Polyamide (sizes A00 to A4) or Steel (All other sizes)
Other materials are available on request, please ask sales for details.

Other Info.
STD inserts will be supplied as standard unless specified.
High Torque (HD) Inserts can be supplied upon request.
Maximum speeds are based on Cast Iron Hubs.
Higher speeds may be attained using Ductile Iron or Steel hubs - Ask Technical department for details.
Distance Between Shaft ends (DBSE) is based on the shafts mating flush with the end of the hub face.
Short or longer shaft separations may be obtained by overhanging the shaft or hub.
Weights and Inertias are based on solid hubs.
Other bores sizes are available on request, up to the maximum bore size stated above.
Please specify your required bore size when ordering.

Downloads
PDF Documents : Catalogue Page | Full Range of Elastomeric Couplings | Technical