Ondrives: Couplings - Flexible Drive Shafts - FD9 & FDQ9 10mm Bores 4.5-28Nm

FD9 FDQ9 : 10mm Bores 4.5-28Nm

Couplings » Flexible Drive Shafts »
FD9 & FDQ9 Type : 10mm bores - 4.50Nm-28.00Nm

FD9 FDQ9 Masterflex Flexible Drive Shaft with Oilite Bushes or Ball Bearings

Discounts

1+ 0%

5+ 5%

25+ 10%

Part Number	Bore	Direction	Max Speed Rpm	Shaft Length	Type	Cost	Quantity	Add to Basket
FD9500	Ø10	A	6000	500	Ball Bearings	£216.96
		B	2000			£216.96
		C	6000			£216.96
FDQ9500	Ø10	A	2000	500	Oilite Bushes	£182.21
		B	200			£182.21
		C	2000			£182.21
FD91000	Ø10	A	6000	1000	Ball Bearings	£248.93
		B	2000			£248.93
		C	6000			£248.93
FDQ91000	Ø10	A	2000	1000	Oilite Bushes	£214.23
		B	200			£214.23
		C	2000			£214.23
FD91500	Ø10	A	6000	1500	Ball Bearings	£280.86
		B	2000			£280.86
		C	6000			£280.86
FDQ91500	Ø10	A	2000	1500	Oilite Bushes	£246.10
		B	200			£246.10
		C	2000			£246.10
FD92000	Ø10	A	6000	2000	Ball Bearings	£312.82
		B	2000			£312.82
		C	6000			£312.82
FDQ92000	Ø10	A	2000	2000	Oilite Bushes	£278.96
		B	200			£278.96
		C	2000			£278.96
FD92500	Ø10	A	6000	2500	Ball Bearings	£344.76
		B	2000			£312.82
		C	6000			£312.82
FDQ92500	Ø10	A	2000	2500	Oilite Bushes	£315.99
		B	200			£315.99
		C	2000			£315.99
FD93000	Ø10	A	6000	3000	Ball Bearings	£376.72
		B	2000			£376.72
		C	6000			£376.72
FDQ93000	Ø10	A	2000	3000	Oilite Bushes	£347.96
		B	200			£347.96
		C	2000			£347.96

A = Anti-clockwise rotation, B = Bi-direction rotation, C = Clockwise rotation (standard)

Direction	Min. Operating Radius	Torsional Deflection (0.1Nm Load at 1m Length		Max Torque (Nm) v Bend radius (mm)
Direction	Min. Operating Radius	Wind	Unwind	200mm	250mm	300mm	350mm	500mm	600mm
A & C	200	0.90°	2.15°	4.50Nm	5.40Nm	6.00Nm	6.55Nm	7.10Nm	7.25Nm
B	200	0.30°	0.63°	13.00Nm	17.00Nm	20.00Nm	23.00Nm	26.00Nm	28.00Nm

Material
Shafts & Ends: Steel 070M420 with plastic cover
End Type:
M = Supplied both ends as standard (FD Type - Ball Bearing)
R = Supplied both ends as standard (FDQ Type - Oilite Bush)
Please specify end option if required different.
Eg. MN, NN / RS, SS
The flexible core has a layer of grease for lubrication in operations of continuous usage eg. an 8 hour day.
We recommend you regrease and check the flexible centre every 3 months.
The knurled ends unscrew to allow the shaft to come out. Re-seal after inspection
Spare flexible centres can be purchased to replace broken or worn examples.

Downloads

PDF Documents : Catalogue Page | Technical | Full Range (inc. Technical)