Ondrives: Couplings - Flexible Drive Shafts - FD8 & FDQ8 8mm Bores 2.7-18.5Nm

FD8 FDQ8 : 8mm Bores 2.7-18.5Nm

Couplings » Flexible Drive Shafts »
FD8 & FDQ8 Type : 8mm bores - 2.70Nm-18.50Nm

FD8 FDQ8 Masterflex Flexible Drive Shaft with Oilite Bushes or Ball Bearings

Discounts

1+ 0%

6+ 10%

30+ 20%

50+ 30%

100+ 35%

200+ 38%

300+ 40%

500+ 42%

1000+ 58%

Part Number	Bore	Direction	Max Speed Rpm	Shaft Length	Type	Cost	Quantity	Add to Basket
FD8500	Ø8	A	6000	500	Ball Bearings	£191.01
		B	2000			£191.01
		C	6000			£191.01
FDQ8500	Ø8	A	2000	500	Oilite Bushes	£156.07
		B	200			£156.07
		C	2000			£156.07
FD81000	Ø8	A	6000	1000	Ball Bearings	£212.97
		B	2000			£212.97
		C	6000			£212.98
FDQ81000	Ø8	A	2000	1000	Oilite Bushes	£177.88
		B	200			£177.88
		C	2000			£177.88
FD41500	Ø8	A	6000	1500	Ball Bearings	£235.01
		B	2000			£235.01
		C	6000			£235.01
FDQ81500	Ø8	A	2000	1500	Oilite Bushes	£199.93
		B	200			£199.93
		C	2000			£199.93
FD82000	Ø8	A	6000	2000	Ball Bearings	£257.08
		B	2000			£257.08
		C	6000			£257.08
FDQ82000	Ø8	A	2000	2000	Oilite Bushes	£222.02
		B	200			£222.02
		C	2000			£222.02
FD82500	Ø8	A	6000	2500	Ball Bearings	£281.82
		B	2000			£281.82
		C	6000			£281.82
FDQ82500	Ø8	A	2000	2500	Oilite Bushes	£246.75
		B	200			£246.75
		C	2000			£246.75
FD83000	Ø8	A	6000	3000	Ball Bearings	£300.98
		B	2000			£300.98
		C	6000			£300.98
FDQ83000	Ø8	A	2000	3000	Oilite Bushes	£265.91
		B	200			£265.91
		C	2000			£265.91

A = Anti-clockwise rotation, B = Bi-direction rotation, C = Clockwise rotation (standard)

Direction	Min. Operating Radius	Torsional Deflection (0.1Nm Load at 1m Length		Max Torque (Nm) v Bend radius (mm)
Direction	Min. Operating Radius	Wind	Unwind	150mm	175mm	200mm	250mm	350mm	600mm
A & C	150	0.65°	1.25°	2.70Nm	1.05Nm	1.35Nm	1.70Nm	2.25Nm	2.85Nm
B	200	0.50°	0.80°	-	-	10.00Nm	12.50Nm	15.80Nm	18.50Nm

Material
Shafts & Ends: Steel 070M420 with plastic cover
End Type:
M = Supplied both ends as standard (FD Type - Ball Bearing)
R = Supplied both ends as standard (FDQ Type - Oilite Bush)
Please specify end option if required different.
Eg. MN, NN / RS, SS
The flexible core has a layer of grease for lubrication in operations of continuous usage eg. an 8 hour day.
We recommend you regrease and check the flexible centre every 3 months.
The knurled ends unscrew to allow the shaft to come out. Re-seal after inspection
Spare flexible centres can be purchased to replace broken or worn examples.

Downloads

PDF Documents : Catalogue Page | Technical | Full Range (inc. Technical)