Ondrives: Couplings - Flexible Drive Shafts - FD6 & FDQ6 6mm Bores 0.80-10.5Nm

FD6 FDQ6 : 6mm Bores 0.80-10.5Nm

Couplings » Flexible Drive Shafts »
FD6 & FDQ6 Type : 6mm bores - 0.80Nm-10.50Nm

FD6 FDQ6 Masterflex Flexible Drive Shaft with Oilite Bushes or Ball Bearings

Discounts

1+ 0%

6+ 10%

30+ 20%

50+ 30%

100+ 35%

200+ 38%

300+ 40%

500+ 42%

1000+ 58%

Part Number	Bore	Direction	Max Speed Rpm	Shaft Length	Type	Cost	Quantity	Add to Basket
FD6500	Ø6	A	8000	500	Ball Bearings	£178.12
		B	3000			£178.12
		C	8000			£178.12
FDQ6500	Ø6	A	2000	500	Oilite Bushes	£148.78
		B	200			£148.78
		C	2000			£148.78
FD61000	Ø6	A	8000	1000	Ball Bearings	£202.73
		B	3000			£202.73
		C	8000			£202.73
FDQ61000	Ø6	A	2000	1000	Oilite Bushes	£173.42
		B	200			£173.42
		C	2000			£173.42
FD61500	Ø6	A	8000	1500	Ball Bearings	£227.12
		B	3000			£227.12
		C	8000			£227.12
FDQ61500	Ø6	A	2000	1500	Oilite Bushes	£197.79
		B	200			£197.79
		C	2000			£197.79
FD62000	Ø6	A	8000	2000	Ball Bearings	£251.46
		B	3000			£251.46
		C	8000			£251.46
FDQ62000	Ø6	A	2000	2000	Oilite Bushes	£222.17
		B	200			£222.17
		C	2000			£222.17
FD62500	Ø6	A	8000	2500	Ball Bearings	£275.89
		B	3000			£275.89
		C	8000			£275.89
FDQ62500	Ø6	A	2000	2500	Oilite Bushes	£246.60
		B	200			£246.60
		C	2000			£246.60
FD63000	Ø6	A	8000	3000	Ball Bearings	£314.35
		B	3000			£314.35
		C	8000			£314.35
FDQ63000	Ø6	A	2000	3000	Oilite Bushes	£285.03
		B	200			£285.03
		C	2000			£285.03

A = Anti-clockwise rotation, B = Bi-direction rotation, C = Clockwise rotation (standard

Direction	Min. Operating Radius	Torsional Deflection (0.1Nm Load at 1m Length		Max Torque (Nm) v Bend radius (mm)
Direction	Min. Operating Radius	Wind	Unwind	125mm	150mm	200mm	250mm	300mm	500mm
A & C	125	3.50°	8.75°	0.80Nm	1.05Nm	1.35Nm	1.70Nm	2.25Nm	2.85Nm
B	125	1.50°	3.25°	4.00Nm	5.00Nm	7.00Nm	8.00Nm	9.00Nm	10.50Nm

Material
Shafts & Ends: Steel 070M420 with plastic cover
End Type:
M = Supplied both ends as standard (FD Type - Ball Bearing)
R = Supplied both ends as standard (FDQ Type - Oilite Bush)
Please specify end option if required different.
Eg. MN, NN / RS, SS
The flexible core has a layer of grease for lubrication in operations of continuous usage eg. an 8 hour day.
We recommend you regrease and check the flexible centre every 3 months.
The knurled ends unscrew to allow the shaft to come out. Re-seal after inspection
Spare flexible centres can be purchased to replace broken or worn examples.

Downloads

PDF Documents : Catalogue Page | Technical | Full Range (inc. Technical)