Ondrives: Couplings - Flexible Drive Shafts - FD5 & FDQ5 5mm Bores 0.26-2.6Nm

FD5 FDQ5 : 5mm Bores 0.26-2.6Nm

Couplings » Flexible Drive Shafts »
FD5 & FDQ5 Type : 5mm bores - 0.26Nm-2.60Nm

FD5 FDQ5 Masterflex Flexible Drive Shaft with Oilite Bushes or Ball Bearings

Discounts

1+ 0%

5+ 5%

25+ 10%

Part Number	Bore	Direction	Max Speed Rpm	Shaft Length	Type	Cost	Quantity	Add to Basket
FD5500	Ø5	A	12000	500	Ball Bearings	£141.43
		B	3000			£141.43
		C	12000			£141.43
FDQ5500	Ø5	A	2000	500	Oilite Bushes	£124.16
		B	200			£124.16
		C	2000			£124.16
FD51000	Ø5	A	12000	1000	Ball Bearings	£156.68
		B	3000			£156.68
		C	12000			£156.68
FDQ51000	Ø5	A	2000	1000	Oilite Bushes	£132.10
		B	200			£132.10
		C	2000			£132.10
FD51500	Ø5	A	12000	1500	Ball Bearings	£171.94
		B	3000			£171.94
		C	12000			£171.94
FDQ51500	Ø5	A	2000	1500	Oilite Bushes	£146.16
		B	200			£146.16
		C	2000			£146.16
FD52000	Ø5	A	12000	2000	Ball Bearings	£187.16
		B	3000			£187.16
		C	12000			£187.16
FDQ52000	Ø5	A	2000	2000	Oilite Bushes	£162.59
		B	200			£162.59
		C	2000			£162.59
FD52500	Ø5	A	12000	2500	Ball Bearings	£202.46
		B	3000			£187.16
		C	12000			£187.16
FDQ52500	Ø5	A	2000	2500	Oilite Bushes	£177.88
		B	200			£177.88
		C	2000			£177.88
FD53000	Ø5	A	12000	3000	Ball Bearings	£217.67
		B	3000			£217.67
		C	12000			£217.67
FDQ53000	Ø5	A	2000	3000	Oilite Bushes	£193.10
		B	200			£193.10
		C	2000			£193.10

A = Anti-clockwise rotation, B = Bi-direction rotation, C = Clockwise rotation (standard)

Direction	Min. Operating Radius	Torsional Defelction (0.1Nm Load at 1m Length		Max Torque (Nm) v Bend radius (mm)
Direction	Min. Operating Radius	Wind	Unwind	100mm	125mm	150mm	200mm	300mm	500mm
A & C	100	9.30°	36.50°	0.26Nm	0.56Nm	0.77Nm	0.90Nm	1.13Nm	1.60Nm
B	100	7.50°	17.00°	1.30Nm	1.70Nm	2.05Nm	2.25Nm	2.40Nm	2.60Nm

Material
Shafts & Ends: Steel 070M420 with plastic cover
End Type:
M = Supplied both ends as standard (FD Type - Ball Bearing)
R = Supplied both ends as standard (FDQ Type - Oilite Bush)
Please specify end option if required different.
Eg. MN, NN / RS, SS
The flexible core has a layer of grease for lubrication in operations of continuous usage eg. an 8 hour day.
We recommend you regrease and check the flexible centre every 3 months.
The knurled ends unscrew to allow the shaft to come out. Re-seal after inspection
Spare flexible centres can be purchased to replace broken or worn examples.

Downloads

PDF Documents : Catalogue Page | Technical | Full Range (inc. Technical)