FD4 FDQ4 : 4mm Bores 0.15-2.1Nm
Couplings » Flexible Drive Shafts »
FD4 & FDQ4 Type : 4mm bores - 0.15Nm-2.10Nm


| Discounts |
1+ 0% |
6+ 10% |
30+ 20% |
50+ 30% |
100+ 35% |
200+ 38% |
300+ 40% |
500+ 42% |
1000+ 58% |
A = Anti-clockwise rotation, B = Bi-direction rotation, C = Clockwise rotation (standard)
| Direction |
Min.
Operating
Radius |
Torsional Defelction
(0.1Nm Load at 1m Length |
Max Torque (Nm) v Bend radius (mm) |
| Wind |
Unwind |
75mm |
100mm |
150mm |
200mm |
300mm |
500mm |
| A & C |
75 |
31.25° |
75.00° |
0.15Nm |
0.20Nm |
0.35Nm |
0.44Nm |
0.53Nm |
0.56Nm |
| B |
75 |
28.00° |
56.00° |
0.65Nm |
1.30Nm |
1.60Nm |
1.85Nm |
2.00Nm |
2.10Nm |
Material
Shafts & Ends: Steel 070M420 with plastic cover
End Type:
M = Supplied both ends as standard (FD Type - Ball Bearing)
R = Supplied both ends as standard (FDQ Type - Oilite Bush)
Please specify end option if required different.
Eg. MN, NN / RS, SS
The flexible core has a layer of grease for lubrication in operations of continuous usage eg. an 8 hour day.
We recommend you regrease and check the flexible centre every 3 months.
The knurled ends unscrew to allow the shaft to come out. Re-seal after inspection
Spare flexible centres can be purchased to replace broken or worn examples.
Downloads
PDF Documents : Catalogue Page | Technical | Full Range (inc. Technical)
|