FD13 FDQ13 : 15mm Bores 7.9-56Nm

Couplings » Flexible Drive Shafts »
FD13 & FDQ13 Type : 15mm bores - 7.90Nm-56.00Nm

FD13 FDQ13 Masterflex Flexible Drive Shaft with Oilite Bushes or Ball Bearings
FD13 FDQ13 Masterflex Flexible Drive Shaft with Oilite Bushes or Ball Bearings Diagram

Discounts 1+ 0% 5+ 5% 25+ 10%

Part
Number		 Bore

Direction

Max
Speed
Rpm

Shaft
Length

Bearings/
Bushes

 Cost Quantity Add to
Basket
FD13500 Ø15 A 4000 500 Ball
Bearings		 £228.61
B 2000 £228.61
C 4000 £228.61
FDQ13500 Ø15 A 2000 500 Oilite
Bushes		 £192.61
B 200 £192.61
C 2000 £192.61
FD131000 Ø15 A 4000 1000 Ball
Bearings		 £270.74
B 2000 £270.74
C 4000 £270.74
FDQ131000 Ø15 A 2000 1000 Oilite
Bushes		 £235.30
B 200 £235.30
C 2000 £235.30
FD131500 Ø15 A 4000 1500 Ball
Bearings		 £313.47
B 2000 £313.47
C 4000 £313.47
FDQ131500 Ø15 A 2000 1500 Oilite
Bushes		 £277.06
B 200 £277.06
C 2000 £277.06
FD132000 Ø15 A 4000 2000 Ball
Bearings		 £355.03
B 2000 £355.03
C 4000 £355.03
FDQ132000 Ø15 A 2000 2000 Oilite
Bushes		 £319.22
B 200 £319.22
C 2000 £319.22
FD132500 Ø15 A 4000 2500 Ball
Bearings		 £398.19
B 2000 £398.19
C 4000 £398.19
FDQ132500 Ø15 A 2000 2500 Oilite
Bushes		 £361.35
B 200 £361.35
C 2000 £361.35
FD133000 Ø15 A 4000 3000 Ball
Bearings		 £439.32
B 2000 £439.32
C 4000 £439.32
FDQ133000 Ø15 A 2000 3000 Oilite
Bushes		 £403.51
B 200 £403.51
C 2000 £403.51

Direction

Min.
Operating
Radius

Torsional Deflection
(0.1Nm Load at 1m Length

Max Torque (Nm) v Bend radius (mm)
Wind Unwind

250mm

300mm

350mm

500mm

600mm

1000mm
A & C 250 0.20° 0.47° 7.90Nm 10.00Nm 12.00Nm 13.00Nm 14.00Nm 15.00Nm
B 250 0.11° 0.20° 23.00Nm 32.00Nm 41.00Nm 49.00Nm 55.00Nm 56.00Nm

Material
Shafts & Ends: Steel 070M420 with plastic cover

Other Info.
Please specify when ordering :-
Direction:
C = Clockwise rotation (standard)
OR
B = Bi-direction rotation (available on request)
OR
A = Anti-clockwise rotation (available on request)
AND
Length:
L = Length (mm)
AND
End Type:
M = Supplied both ends as standard (FD Type - Ball Bearing)
R = Supplied both ends as standard (FDQ Type - Oilite Bush)
Please specify end option if required different.
Eg. MN, NN / RS, SS
The flexible core has a layer of grease for lubrication in operations of continuous usage eg. an 8 hour day. We recommend you regrease and check the flexible centre every 3 months. The knurled ends unscrew to allow the shaft to come out. Re-seal after inspection
Spare flexible centres can be purchased to replace broken or worn examples.

Downloads
 PDF Documents : Size 13 Catalogue Page | Technical | Full Range (inc. Technical)