FAP10/4 : 10mm Dia. Flexible Spring Shafts

Couplings » Flexible Drive Shafts »
FAP10/4 : Flexible Spring Shafts (Ø10mm)

Material:
•Shaft: Steel
•End Couplings: Steel, press mounted.
•Tube: Rilsan®

FAP/4 flexible shafts consist of a spring shaft and a protection Rilsan® tube, and are used for the transmission of rotational motion. They are fitted with steel terminal couplings as per the diagram above. Standard lengths range from 500mm to 1500mm. Other lengths are available on request but may be subject to minimum order quantities, please contact sales for details.
Discounts1+ 0%
Part
Number 		Shaft
Ø		 ØA ØB ØC Bending
Radius		 Torsion Length End
Coupling
Type		 Cost Quantity Add to
Basket
FAP10/4C-500-SX 10 14 14 10 130 30° 500 C £119.53
FAP10/4C-1000-SX 10 14 14 10 130 30° 1000 C £132.71
FAP10/4C-1500-SX 10 14 14 10 130 30° 1500 C £152.96
FAP10/4C-2000-SX 10 14 14 10 130 30° 2000 C £186.44
FAP10/4C-500-DX 10 14 14 10 130 20° 500 C £97.27
FAP10/4C-1000-DX 10 14 14 10 130 20° 1000 C £110.45
FAP10/4C-1500-DX 10 14 14 10 130 20° 1500 C £130.70
FAP10/4C-2000-DX 10 14 14 10 130 20° 2000 C £164.18
FAP10/4G-500-SX 10 14 14 10 130 30° 500 G £POA
FAP10/4G-1000-SX 10 14 14 10 130 30° 1000 G £POA
FAP10/4G-1500-SX 10 14 14 10 130 30° 1500 G £POA
FAP10/4G-2000-SX 10 14 14 10 130 30° 2000 G £POA
FAP10/4G-500-DX 10 14 14 10 130 20° 500 G £POA
FAP10/4G-1000-DX 10 14 14 10 130 20° 1000 G £POA
FAP10/4G-1500-DX 10 14 14 10 130 20° 1500 G £POA
FAP10/4G-2000-DX 10 14 14 10 130 20° 2000 G £POA
Note: Shafts can be used in both directions of rotation – right hand and left hand. However, it is advisable to choose a left hand drive (-SX) shaft to turn clockwise and a right hand (-DX) shaft to turn counterclockwise otherwise the maximum torque will be 30% lower (see technical page for torque calculations).
End Couplings:
Steel coupling terminals for flexible shafts, press-mounted. Made to your specifications, on request.
C Type (Standard) G Type (POA)
C Type
End
Coupling 		Shaft
Ø		 ØB
6/C 4 - 5 - 6 8
8/C 8 12
10/C 10 14
12/C 12 16
G Type
End
Coupling 		Shaft
Ø		 ØA ØB
5/G 5 6 14
8/G 8 8 16
Downloads:
 PDF Documents: Product Pages | Technical Info.