AF10 : 10mm Dia. Flexible Spring Shafts

Couplings » Flexible Drive Shafts »
AF10 : Flexible Spring Shafts (Ø10mm)

Material:
•Shaft: Steel
•End Couplings: Steel, press mounted

AF flexible spring shafts are used for the transmission of rotational motion. Steel terminal couplings are fitted onto each end of the shaft, and are locked on by means of a press. Standard lengths range from 500mm to 1500mm. Other lengths are available on request but may be subject to minimum order quantities, please contact sales for details.
Discounts1+ 0%
Part
Number 		Shaft
Ø		 ØA ØB Bending
Radius		 Torsion Length End
Coupling
Type		 Cost Quantity Add to
Basket
AF10/C-500-SX 10 10 14 130 30° 500 C £101.72
AF10/C-1000-SX 10 10 14 130 30° 1000 C £115.97
AF10/C-1500-SX 10 10 14 130 30° 1500 C £136.84
AF10/C-2000-SX 10 10 14 130 30° 2000 C £165.51
AF10/C-500-DX 10 10 14 130 20° 500 C £79.46
AF10/C-1000-DX 10 10 14 130 20° 1000 C £93.71
AF10/C-1500-DX 10 10 14 130 20° 1500 C £114.58
AF10/C-2000-DX 10 10 14 130 20° 2000 C £143.25
AF10/G-500-SX 10 10 14 130 30° 500 G £0.00
AF10/G-1000-SX 10 10 14 130 30° 1000 G £0.00
AF10/G-1500-SX 10 10 14 130 30° 1500 G £0.00
AF10/G-2000-SX 10 10 14 130 30° 2000 G £0.00
AF10/G-500-DX 10 10 14 130 20° 500 G £0.00
AF10/G-1000-DX 10 10 14 130 20° 1000 G £0.00
AF10/G-1500-DX 10 10 14 130 20° 1500 G £0.00
AF10/G-2000-DX 10 10 14 130 20° 2000 G £0.00
Note: Shafts can be used in both directions of rotation – right hand and left hand. However, it is advisable to choose a left hand drive (-SX) shaft to turn clockwise and a right hand (-DX) shaft to turn counterclockwise otherwise the maximum torque will be 30% lower (see technical page for torque calculations).
End Couplings:
Steel coupling terminals for flexible shafts, press-mounted. Made to your specifications, on request.
C Type (Standard) G Type (POA)
C Type
End
Coupling 		Shaft
Ø		 ØB
6/C 4 - 5 - 6 8
8/C 8 12
10/C 10 14
12/C 12 16
G Type
End
Coupling 		Shaft
Ø		 ØA ØB
5/G 5 6 14
8/G 8 8 16
Downloads:
 PDF Documents: Product Pages | Technical Info.