Ondrives: Couplings - Clutches - EAS & EFS - Slip-Ease Clutches - 8-20mm Bores 0.01Nm

EAS EFS : Slip-Ease Clutches

Couplings » Clutches »
EAS & EFS Type : Slip-Ease Clutches : 8 - 32mm bores : 0.01Nm - 60.00Nm

EAS EFS Slip-Ease Adjustable Friction Clutches

Discounts

1+ 0%

5+ 4%

10+ 8%

25+ 12%

50+ 18%

100+ 22%

Part Number	ØA	^+0.05ØB Std.^-0.00	^+0.05ØB Max.^-0.00	C	ØD	E	Capacity at 50 rpm Nm*	Capacity at 50 rpm Watts	Number of Springs	Friction Surfaces	Cost	Quantity	Add to Basket
EFS20-8-xx	25.40	8.00	10.00	30.23	19.05	6.35	0.01 - 2.0	9.0	6	12	£POA
EAS20-8	25.40	8.00	10.00	38.10	19.05	6.35	0.01 - 2.0	9.0	6	12	£143.80
EFS24-10-xx	34.90	10.00	13.00	50.80	25.40	9.40	0.05 - 3.0	14.5	6	12	£POA
EAS24-10	34.90	10.00	13.00	63.50	25.40	9.40	0.05 - 3.0	14.5	6	12	£241.88
EFS32-12-xx	41.28	12.00	16.00	47.50	34.93	12.70	0.10 - 6.0	29.0	6	12	£POA
EAS32-12	41.28	12.00	16.00	61.98	34.93	12.70	0.10 - 6.0	29.0	6	12	£307.25
EFS44-12-xx	57.15	12.00	16.00	47.50	41.28	12.70	0.10 - 9.0	43.0	6	12	£POA
EAS44-12	57.15	12.00	16.00	61.98	41.28	12.70	0.10 - 9.0	43.0	6	12	£449.45
EAS52-20	82.55	20.00	32.00	101.60	50.80	12.70	3.00 - 60.0	250.0	9	12	£670.01

Ordering
Clutches supplied with standard bores - alternative bore sizes available P.O.A. Minimum order quantities may apply.
* When ordering EFS preset type, xx in part number is to be replaced with torque value to be supplied -
eg. EFS20-8-1.0 for 1.0Nm. Minimum quantity of 3 pieces apply. These must be confirmed with Sales
Higher torque version is available on models with 6 springs P.O.A. Add H to end of part number.

Other Info.
SLIP-EASE utilises an axial loaded multi-plate design.
For applications where space is at a premium and low backlash is required.
Backlash of 2° as standard.

Downloads
DXF Drawings (Zip archived) : EAS-20
PDF Documents : Catalogue Page