1 Mod (Steel)
Commercial Gears » Parallel Helical Gears »
SH Type : 1 Mod Parallel Helical Gears - Steel
|
 |
|||||||||||||||||||||||||
| Discounts | 1+ 0% | 6+ 12% | 20+ 25% | 40+ 33% | 60+ 37% | 100+ 42% |
|
Part
Number |
Teeth Z |
PCD ØP |
O/D ØD |
Boss ØM |
Bore ØA |
Left Hand Cost |
Quantity | Add to Basket |
Right Hand Cost |
Quantity | Add to Basket |
| SH1-10 | 10 | 10.50 | 12.50 | 12 | 6 | £12.85 |
|
£12.85 |
|
||
| SH1-12 | 12 | 12.60 | 14.60 | 12 | 6 | £12.85 |
|
£12.85 |
|
||
| SH1-15 | 15 | 15.75 | 17.75 | 12 | 6 | £13.53 |
|
£13.53 |
|
||
| SH1-16 | 16 | 16.80 | 18.80 | 15 | 8 | £13.77 |
|
£13.77 |
|
||
| SH1-20 | 20 | 21.00 | 23.00 | 15 | 8 | £15.02 |
|
£15.02 |
|
||
| SH1-25 | 25 | 26.25 | 28.25 | 15 | 8 | £16.07 |
|
£16.07 |
|
||
| SH1-28 | 28 | 29.40 | 31.40 | 15 | 8 | £17.41 |
|
£17.41 |
|
||
| SH1-29 | 29 | 30.45 | 32.45 | 15 | 8 | £17.85 |
|
£17.85 |
|
||
| SH1-30 | 30 | 31.50 | 33.50 | 20 | 8 | £18.20 |
|
£18.20 |
|
||
| SH1-33 | 33 | 34.65 | 36.65 | 20 | 8 | £18.83 |
|
£18.83 |
|
||
| SH1-35 | 35 | 36.75 | 38.75 | 20 | 8 | £19.23 |
|
£19.23 |
|
||
| SH1-40 | 40 | 42.00 | 44.00 | 20 | 8 | £20.78 |
|
£20.78 |
|
||
| SH1-45 | 45 | 47.25 | 49.25 | 20 | 8 | £21.18 |
|
£21.18 |
|
||
| SH1-50 | 50 | 52.50 | 54.50 | 30 | 10 | £23.59 |
|
£23.59 |
|
||
| SH1-55 | 55 | 57.75 | 59.75 | 30 | 10 | £25.33 |
|
£25.33 |
|
||
| SH1-60 | 60 | 63.00 | 65.00 | 30 | 10 | £26.71 |
|
£26.71 |
|
||
| SH1-65 | 65 | 68.25 | 70.25 | 30 | 10 | £29.58 |
|
£29.58 |
|
||
| SH1-66 | 66 | 69.30 | 71.30 | 30 | 10 | £30.20 |
|
£30.20 |
|
||
| SH1-70 | 70 | 73.50 | 75.50 | 30 | 10 | £31.66 |
|
£31.66 |
|
||
| SH1-80 | 80 | 84.00 | 86.00 | 30 | 10 | £35.77 |
|
£35.77 |
|
||
| SH1-90 | 90 | 94.50 | 96.50 | 30 | 10 | £38.23 |
|
£38.23 |
|
||
| SH1-100 | 100 | 105.00 | 107.00 | 30 | 10 | £42.90 |
|
£42.90 |
|
||
| SH1-120 | 120 | 126.00 | 128.00 | 40 | 12 | £60.72 |
|
£60.72 |
|
||
| SH1-130 | 130 | 136.50 | 138.50 | 40 | 12 | £65.14 |
|
£65.14 |
|
||
| SH1-150 | 150 | 157.50 | 159.50 | 40 | 15 | £80.79 |
|
£80.79 |
|
||
| Larger sizes available upto... | |||||||||||
| SH1-550 | 550 | Contact us for larger sizes & dimensions - P.O.A | |||||||||
Material
- Steel 214M15
- 20° Pressure angle
- Any two part numbers of this pitch will run together
- Reduced noise in operation
- Left hand runs with right hand
Options
- PSH Type (plain) helical gears - P.O.A.
- Different number of teeth
- Modifications available on request: Other material, boring out, Keyways, tapped holes, pin holes.
Accessories
- Clamping sets, screws, keys, dowel pins...
Downloads
PDF Documents : Catalogue Page | Full Range of Commercial Parallel Helical Gears
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login