• Welcome
• Gearboxes / Reducers
• Precision Gears
• Commercial Gears
• Spur Gears
• Parallel Helical Gears
• 0.4 Mod (Steel)
• 0.5 Mod (Steel)
• 0.7 Mod (Steel)
• 0.8 Mod (Steel)
• 1 Mod (Steel)
• 1.25 Mod (Steel)
• 1.5 Mod (Steel)
• 2 Mod (Steel)
• 2.5 Mod (Steel)
• 3 Mod (Steel)
• 4 Mod (Steel)
• 0.5 Mod (Delrin)
• 0.7 Mod (Delrin)
• 0.8 Mod (Delrin)
• 1 Mod (Delrin)
• 1.25 Mod (Delrin)
• 1.5 Mod (Delrin)
• 2 Mod (Delrin)
• 2.5 Mod (Delrin)
• 3 Mod (Delrin)
• Crossed Axis Helical Gears
• Racks
• Pinion Shafts
• Anti-Backlash Gears
• Double Gears
• Internal Gears
• Bevel Gears
• Worms & Wormwheels
• Pulleys, Belts & Sprockets
• Couplings
• Linear
• Bearings
• Fasteners
• Anti-Vibration
• Springs
• Mechanical

• British Pounds Sterling US Dollars Euros
• 
• 
• 
• 
• 
• 
• 
• 
• 

1.25 Mod (Steel)

Commercial Gears » Parallel Helical Gears »
SH Type : 1.25 Mod Parallel Helical Gears - Steel

Torque and Power Rating 50 Teeth at 1000 rpm 214M15 303S21 214M15 Case Hd. Brass Delrin Nm 6.61 43.45 3.31 1.5 kW 0.69 4.55 0.34 -

Part Number	Teeth Z	PCD ØP	O/D ØD	Boss ØM	Bore ØA	Left Hand Cost	Quantity	Add to Basket	Right Hand Cost	Quantity	Add to Basket
SH1.25-10	10	13.13	15.63	12	6	£16.58			£16.58
SH1.25-15	15	19.69	22.19	12	6	£18.03			£18.03
SH1.25-18	18	23.63	26.13	15	8	£19.58			£19.58
SH1.25-20	20	26.25	28.75	15	8	£20.66			£20.66
SH1.25-21	21	27.56	30.06	15	8	£20.93			£20.93
SH1.25-25	25	32.81	35.31	15	8	£22.17			£22.17
SH1.25-30	30	39.38	41.88	25	8	£25.39			£25.39
SH1.25-35	35	45.94	48.44	25	8	£27.96			£27.96
SH1.25-37	37	45.56	51.06	25	8	£28.58			£28.58
SH1.25-40	40	52.50	55.00	30	10	£29.50			£29.50
SH1.25-45	45	59.06	61.56	30	10	£30.12			£30.12
SH1.25-50	50	65.63	68.13	30	10	£31.48			£31.48
SH1.25-55	55	72.19	74.69	30	10	£32.80			£32.80
SH1.25-60	60	78.75	81.25	30	10	£37.91			£37.91
SH1.25-65	65	85.31	87.81	30	10	£40.20			£40.20
SH1.25-70	70	91.88	94.38	30	10	£42.41			£42.41
SH1.25-76	76	99.75	102.25	30	10	£43.85			£43.85
SH1.25-80	80	105.00	107.50	30	10	£48.43			£48.43
SH1.25-88	88	115.50	118.00	30	10	£53.64			£53.64
SH1.25-90	90	118.13	120.63	40	12	£54.14			£54.14
SH1.25-96	96	126.00	128.50	30	10	£62.23			£62.23
SH1.25-100	100	131.25	133.75	40	12	£63.25			£63.25
SH1.25-120	120	157.50	160.00	50	15	£74.90			£74.90
SH1.25-130	130	170.63	173.13	50	15	£83.49			£83.49
SH1.25-140	140	183.75	186.25	50	15	£90.21			£90.21
Larger sizes available upto...
SH1.25-450	450	Contact us for larger sizes & dimensions - P.O.A

Material
- Steel 214M15
- 20° Pressure angle
- Any two part numbers of this pitch will run together
- Reduced noise in operation
- Left hand runs with right hand

Options
- PSH Type (plain) helical gears - P.O.A.
- Different number of teeth
- Modifications available on request: Other material, boring out, Keyways, tapped holes, pin holes.

Accessories
- Clamping sets, screws, keys, dowel pins...

Downloads
PDF Documents : Catalogue Page | Full Range of Commercial Parallel Helical Gears

Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™  |  Login