• Welcome
• Gearboxes / Reducers
• Precision Gears
• Commercial Gears
• Spur Gears
• Parallel Helical Gears
• 0.4 Mod (Steel)
• 0.5 Mod (Steel)
• 0.7 Mod (Steel)
• 0.8 Mod (Steel)
• 1 Mod (Steel)
• 1.25 Mod (Steel)
• 1.5 Mod (Steel)
• 2 Mod (Steel)
• 2.5 Mod (Steel)
• 3 Mod (Steel)
• 4 Mod (Steel)
• 0.5 Mod (Delrin)
• 0.7 Mod (Delrin)
• 0.8 Mod (Delrin)
• 1 Mod (Delrin)
• 1.25 Mod (Delrin)
• 1.5 Mod (Delrin)
• 2 Mod (Delrin)
• 2.5 Mod (Delrin)
• 3 Mod (Delrin)
• Crossed Axis Helical Gears
• Racks
• Pinion Shafts
• Anti-Backlash Gears
• Double Gears
• Internal Gears
• Bevel Gears
• Worms & Wormwheels
• Pulleys, Belts & Sprockets
• Couplings
• Linear
• Bearings
• Fasteners
• Anti-Vibration
• Springs
• Mechanical

• British Pounds Sterling US Dollars Euros
• 
• 
• 
• 
• 
• 
• 
• 
• 

0.4 Mod (Steel)

Torque and Power Rating 50 Teeth at 1000 rpm 214M15 303S21 214M15 Case Hd. Brass Nm 0.28 1.12 0.14 kW 0.03 0.12 0.01

Part Number	Teeth Z	PCD ØP	O/D ØD	Boss ØM	Bore ØA	Left Hand Cost	Quantity	Add to Basket	Right Hand Cost	Quantity	Add to Basket
SH0.4-10	10	4.62	5.42	5.42	2	£12.31			£12.31
SH0.4-15	15	6.30	7.10	7.10	2	£12.40			£12.40
SH0.4-20	20	8.40	9.20	8.00	3	£12.40			£12.40
SH0.4-25	25	10.50	11.30	8.00	3	£12.38			£12.38
SH0.4-30	30	12.60	13.40	8.00	3	£12.54			£12.54
SH0.4-35	35	14.70	15.50	8.00	3	£12.85			£12.85
SH0.4-40	40	16.80	17.60	12.00	4	£13.15			£13.15
SH0.4-45	45	18.90	19.70	12.00	4	£13.64			£13.64
SH0.4-50	50	21.00	21.80	12.00	4	£14.03			£14.03
SH0.4-55	55	23.10	23.90	12.00	4	£14.46			£14.46
SH0.4-60	60	25.20	26.00	12.00	4	£15.08			£15.08
SH0.4-65	65	27.30	28.10	12.00	4	£15.81			£15.81
SH0.4-70	70	29.40	30.20	12.00	4	£16.00			£16.00
SH0.4-75	75	31.50	32.30	12.00	4	£16.23			£16.23
SH0.4-80	80	33.60	34.40	12.00	5	£16.50			£16.50
SH0.4-86	86	36.12	36.92	12.00	5	£17.11			£17.11
SH0.4-90	90	37.80	38.60	12.00	5	£17.73			£17.73
SH0.4-100	100	42.00	42.80	12.00	5	£18.40			£18.40
SH0.4-120	120	50.40	51.20	12.00	5	£18.65			£18.65
SH0.4-140	140	58.80	59.60	12.00	5	£20.31			£20.31
SH0.4-150	150	63.00	63.80	12.00	5	£20.94			£20.94
SH0.4-180	180	75.60	76.40	15.00	6	£29.50			£29.50
SH0.4-200	200	84.00	84.80	15.00	8	£33.13			£33.13
SH0.4-220	220	92.40	93.20	15.00	8	£38.10			£38.10
SH0.4-250	250	105.00	105.80	20.00	10	£43.32			£43.32
	Larger sizes available upto...
SH0.4-440	440	Contact us for larger sizes & dimensions - P.O.A

Material
- Steel 214M15
- 20° Pressure angle
- Any two part numbers of this pitch will run together
- Reduced noise in operation
- Left hand runs with right hand

Options
- PSH Type (plain) helical gears - P.O.A.
- Different number of teeth
- Modifications available on request: Other material, boring out, Keyways, tapped holes, pin holes.

Accessories
- Clamping sets, screws, keys, dowel pins...

Downloads
PDF Documents : Catalogue Page | Full Range of Commercial Parallel Helical Gears

Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™  |  Login