1.25 Mod (Steel)
Commercial Gears » Crossed Axis Helical Gears »
H Type : 1.25 Mod Crossed Axis Helical Gears - Steel
|
 |
|||||||||||||||
| Discounts | 1+ 0% | 6+ 12% | 20+ 25% | 40+ 33% | 60+ 37% | 100+ 42% |
|
Part Number |
Teeth Z |
PCD ØP |
O/D ØD |
Boss ØM |
Bore ØA |
Right Hand Cost |
Quantity | Add to Basket |
| H1.25-10 | 10 | 17.68 | 20.18 | 15 | 6 | £17.16 |
|
|
| H1.25-16 | 16 | 28.28 | 30.78 | 20 | 8 | £20.35 |
|
|
| H1.25-17 | 17 | 30.05 | 32.55 | 20 | 8 | £21.15 |
|
|
| H1.25-20 | 20 | 35.36 | 37.86 | 20 | 8 | £23.41 |
|
|
| H1.25-22 | 22 | 38.89 | 41.39 | 20 | 8 | £25.19 |
|
|
| H1.25-25 | 25 | 44.19 | 46.69 | 20 | 8 | £27.08 |
|
|
| H1.25-28 | 28 | 49.50 | 52.00 | 20 | 8 | £28.01 |
|
|
| H1.25-30 | 30 | 53.03 | 55.53 | 20 | 8 | £28.47 |
|
|
| H1.25-32 | 32 | 56.57 | 59.07 | 20 | 8 | £28.76 |
|
|
| H1.25-33 | 33 | 58.34 | 60.84 | 20 | 8 | £28.95 |
|
|
| H1.25-36 | 36 | 63.64 | 66.14 | 20 | 8 | £30.24 |
|
|
| H1.25-40 | 40 | 70.71 | 73.21 | 25 | 10 | £34.11 |
|
|
| H1.25-45 | 45 | 79.55 | 82.05 | 25 | 10 | £37.73 |
|
|
| H1.25-50 | 50 | 88.39 | 90.89 | 25 | 10 | £40.60 |
|
|
| H1.25-56 | 56 | 98.99 | 101.49 | 25 | 10 | £46.09 |
|
|
| H1.25-60 | 60 | 106.07 | 108.57 | 25 | 10 | £51.09 |
|
|
| H1.25-66 | 66 | 116.67 | 119.17 | 25 | 10 | £62.07 |
|
|
| H1.25-70 | 70 | 123.74 | 126.24 | 25 | 12 | £64.69 |
|
|
| H1.25-76 | 76 | 134.35 | 136.85 | 25 | 12 | £70.34 |
|
|
| H1.25-80 | 80 | 141.42 | 143.92 | 25 | 12 | £72.50 |
|
|
| H1.25-84 | 84 | 148.49 | 150.99 | 30 | 15 | £76.64 |
|
|
| H1.25-90 | 90 | 159.10 | 161.60 | 30 | 15 | £79.83 |
|
|
| H1.25-96 | 96 | 169.71 | 172.21 | 30 | 15 | £85.91 |
|
|
| H1.25-100 | 100 | 176.78 | 179.28 | 30 | 15 | £92.02 |
|
|
| H1.25-112 | 112 | 197.99 | 200.49 | 40 | 20 | £103.13 |
|
|
| Larger sizes available upto... | ||||||||
| H1.25-330 | 330 | Contact us for larger sizes & dimensions - P.O.A | ||||||
Material
- Steel 214M15
- 20° Pressure angle
- Any two part numbers of this pitch will run together
- Right hand runs with right hand. Right hand teeth supplied as standard
Options
- PH Type (plain) helical gears - P.O.A.
- Different number of teeth
- Modifications available on request: Other material, boring out, Keyways, tapped holes, pin holes.
- Left hand teeth available on request P.O.A
Accessories
- Clamping sets, screws, keys, dowel pins...
Downloads
PDF Documents : Catalogue Page | Full Range of Commercial Cross Axis Helical Gears
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login