0.5 Mod (Steel)
Commercial Gears » Crossed Axis Helical Gears »
H Type : 0.5 Mod Crossed Axis Helical Gears - Steel
|
 |
|||||||||||||||
| Discounts | 1+ 0% | 6+ 12% | 20+ 25% | 40+ 33% | 60+ 37% | 100+ 42% |
|
Part Number |
Teeth Z |
PCD ØP |
O/D ØD |
Boss ØM |
Bore ØA |
Right Hand Cost |
Quantity | Add to Basket |
| H0.5-10 | 10 | 7.07 | 8.07 | 8.07 | 3 | £12.68 |
|
|
| H0.5-12 | 12 | 8.49 | 9.49 | 8.50 | 3 | £13.00 |
|
|
| H0.5-14 | 14 | 9.90 | 10.90 | 8.50 | 4 | £13.49 |
|
|
| H0.5-15 | 15 | 10.61 | 11.61 | 8.50 | 4 | £13.77 |
|
|
| H0.5-20 | 20 | 14.14 | 15.14 | 10.00 | 5 | £14.84 |
|
|
| H0.5-25 | 25 | 17.68 | 18.68 | 10.00 | 5 | £15.97 |
|
|
| H0.5-26 | 26 | 18.38 | 19.38 | 10.00 | 5 | £16.14 |
|
|
| H0.5-30 | 30 | 21.21 | 22.21 | 10.00 | 5 | £17.10 |
|
|
| H0.5-35 | 35 | 24.75 | 25.75 | 10.00 | 5 | £18.35 |
|
|
| H0.5-36 | 36 | 25.46 | 26.46 | 10.00 | 5 | £18.46 |
|
|
| H0.5-40 | 40 | 28.28 | 29.28 | 10.00 | 5 | £19.20 |
|
|
| H0.5-46 | 46 | 35.53 | 33.53 | 10.00 | 5 | £20.37 |
|
|
| H0.5-50 | 50 | 35.36 | 36.36 | 12.00 | 6 | £20.79 |
|
|
| H0.5-56 | 56 | 39.60 | 40.60 | 12.00 | 6 | £21.41 |
|
|
| H0.5-60 | 60 | 42.43 | 43.43 | 12.00 | 6 | £21.86 |
|
|
| H0.5-64 | 64 | 45.25 | 46.25 | 12.00 | 6 | £22.48 |
|
|
| H0.5-70 | 70 | 49.50 | 50.50 | 12.00 | 6 | £22.56 |
|
|
| H0.5-75 | 75 | 53.03 | 54.03 | 12.00 | 6 | £27.32 |
|
|
| H0.5-80 | 80 | 56.57 | 57.57 | 12.00 | 6 | £27.32 |
|
|
| H0.5-90 | 90 | 63.64 | 64.64 | 12.00 | 6 | £32.64 |
|
|
| H0.5-100 | 100 | 70.71 | 71.71 | 16.00 | 6 | £36.07 |
|
|
| H0.5-120 | 120 | 84.85 | 85.85 | 20.00 | 8 | £40.14 |
|
|
| H0.5-140 | 140 | 98.99 | 99.99 | 20.00 | 8 | £43.85 |
|
|
| H0.5-150 | 150 | 106.07 | 107.07 | 20.00 | 10 | £47.80 |
|
|
| H0.5-180 | 180 | 127.26 | 128.28 | 20.00 | 10 | £53.58 |
|
|
| Larger sizes available upto... | ||||||||
| H0.5-260 | 260 | Contact us for larger sizes & dimensions - P.O.A | ||||||
Material
- Steel 214M15
- 20° Pressure angle
- Any two part numbers of this pitch will run together
- Right hand runs with right hand. Right hand teeth supplied as standard
Options
- PH Type (plain) helical gears - P.O.A.
- Different number of teeth
- Modifications available on request: Other material, boring out, Keyways, tapped holes, pin holes.
- Left hand teeth available on request P.O.A
Accessories
- Clamping sets, screws, keys, dowel pins...
Downloads
PDF Documents : Catalogue Page | Full Range of Commercial Cross Axis Helical Gears
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login