PM : Male with Integral Self-Aligning Bearing
Bearings » Rod Ends »
PM : Male with Integral Self-Aligning Ball Bearing
| Discounts | 1+ 0% | 6+ 5% | 20+ 10% | 40+ 15% | 60+ 20% | 100+ 30% |
| Part Number | d1 | d3 | d4 | d6 | d7 | b1 | b3 | h1* | h2 | u | z | L1* | L2 | L3 |  ° |
Weight (kg) | Calculation factors |
Speed limit nmax(min-1) |
Basic Load Rating (N) |
Cost RH Thread |
Quantity | Add to Basket |
Cost LH Thread |
Quantity | Add to Basket |
||||
| RH Thread | LH Thread | Long Length |
Short* Length |
Y | Yo | Dynamic C |
Static Co |
||||||||||||||||||||||
| PM-05/RH | PM-05/LH | 5 | M8x1.0 | 7.5 | 19 | 12 | 12 | 8 | 33.5 | 57 | 1.5 | 2.5 | 16 | 39.5 | 13 | 7.0° | 0.037 | 0.033 | 1.51 | 1.58 | 1350 | 1610 | 480 | £44.86 |
|
£44.86 |
|
||
| PM-06/RH | PM-06/LH | 6 | M10x1.0 | 8.5 | 24 | 14 | 14 | 10 | 40.5 | 64 | 1.5 | 2.5 | 19 | 42.5 | 17 | 10.5° | 0.062 | 0.057 | 1.28 | 1.34 | 1300 | 2445 | 765 | £43.42 |
|
£43.42 |
|
||
| PM-08/RH | PM-08/LH | 8 | M12x1.5 | 11.0 | 30 | 17 | 15 | 10 | 48.5 | 72 | 2.0 | 2.5 | 23 | 46.5 | 20 | 8.5° | 0.097 | 0.088 | 1.90 | 1.81 | 1225 | 2605 | 985 | £46.97 |
|
£46.97 |
|
||
| PM-10/RH | PM-10/LH | 10 | M14x1.5 | 13.5 | 36 | 19 | 20 | 14 | 58.5 | 82 | 2.5 | 2.5 | 26 | 49.5 | 28 | 9.5° | 0.168 | 0.154 | 1.69 | 1.77 | 1100 | 5120 | 1905 | £51.92 |
|
£51.92 |
|
||
| PM-12/RH | PM-12/LH | 12 | M16x1.5 | 15.0 | 40 | 21 | 20 | 14 | 65.5 | 90 | 3.0 | 2.5 | 29 | 53.5 | 31 | 7.5° | 0.226 | 0.204 | 1.81 | 1.90 | 1050 | 5345 | 2065 | £59.67 |
|
£59.67 |
|
||
| PM-15/RH | PM-15/LH | 15 | M20x1.5 | 18.5 | 42 | 26 | 20 | 14 | 73.5 | 100 | 3.0 | 2.5 | 36 | 62.5 | 30 | 6.5° | 0.310 | 0.273 | 2.07 | 2.17 | 975 | 5485 | 3270 | £68.88 |
|
£68.88 |
|
||
| PM-17/RH | PM-17/LH | 17 | M20x1.5 | 21.0 | 48 | 26 | 22 | 16 | 78.5 | 105 | 3.5 | 2.5 | 36 | 62.5 | 36 | 7.0° | 0.401 | 0.354 | 2.35 | 2.46 | 875 | 5575 | 2680 | £78.40 |
|
£78.40 |
|
||
| PM-20/RH | PM-20/LH | 20 | M24x1.5 | 24.0 | 56 | 30 | 24 | 18 | 89.5 | 117 | 3.5 | 3.0 | 41 | 68.5 | 41 | 5.5° | 0.587 | 0.519 | 2.76 | 2.90 | 775 | 6165 | 3140 | £102.09 |
|
£102.09 |
|
||
Material
Rod End Housing: Forged steel, tempered, case hardened bearing race, ground and lapped, rolled thread, surface galvanized
Inner Ring: Ball bearing steel, hardened, superfine ground.
Lubrication: Calcium-complex-soap-grease. Temperature Range: -20ºC to +120ºC
Lubrication Nipple: DIN 3405 D1/A
Features
• Low maintenance
• Longtime lubrication
• Shields adapter sizes according to ISO12240-4, series K
• Bearing clearance 15-40µm radial
Downloads
PDF Documents : Catalogue Page | Full Range of Rod Ends
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login