Ondrives: Bearings - Rod Ends - PF - Female with Integral Self-Aligning Bearing

PF : Female with Integral Self-Aligning Bearing

Bearings » Rod Ends »
PF : Female with Integral Self-Aligning Ball Bearing

PF : Female with Integral Self-Aligning Ball Bearing

Discounts

1+ 0%

6+ 5%

20+ 10%

40+ 15%

60+ 20%

100+ 30%

Part Number		d1	d2	d3	d4	d6	b1	b3	h	L	L3	r	SW	°	Weight (kg)	Calculation factors		Speed limit nmax^(min-1)	Basic Load Rating (N)		Cost RH Thread	Quantity	Add to Basket	Cost LH Thread	Quantity	Add to Basket
RH Thread	LH Thread	d1	d2	d3	d4	d6	b1	b3	h	L	L3	r	SW	°	Weight (kg)	Y	Yo	Speed limit nmax^(min-1)	Dynamic C	Static Co	Cost RH Thread	Quantity	Add to Basket	Cost LH Thread	Quantity	Add to Basket
PF-10/RH	PF-10/LH	10	15	M8	13.0	30	13.0	9	38	17	14.5	10	13	7.0°	0.063	1.90	1.81	1225	2605	985	£42.37			£42.37
PF-15/RH	PF-15/LH	15	19	M12	17.5	40	16.5	12	51	24	20.0	15	17	7.0°	0.140	2.30	2.41	1025	5000	1890	£60.03			£60.03
PF-20/RH	PF-20/LH	20	22	M16	24.0	48	20.5	15	65	32	22.0	20	19	6.5°	0.223	2.34	2.45	850	6105	2955	£81.94			£81.94

Material
Rod End Housing: Forged steel, tempered, case hardened bearing race, ground and lapped, rolled thread, surface galvanized
Inner Ring: Ball bearing steel, hardened, superfine ground.
Lubrication: Calcium-complex-soap-grease. Temperature Range: -20ºC to +120ºC
Lubrication Nipple: DIN 3405 D1/A

Features
• Low maintenance
• Longtime lubrication
• Shields
• Bearing clearance 15-40µm radial

Downloads
PDF Documents : Catalogue Page | Full Range of Rod Ends