Ondrives: Bearings - Rod Ends - CMM - Steel Male Rod Ends Self Lubricating

CMM : Steel Male Rod Ends Self Lub.

Bearings » Rod Ends »
CMM Type : Steel Male Rod Ends Self Lubricating 5mm-20mm Bores

CMM Type : Steel Male Rod Ends Self Lubricating 5mm-20mm Bores

Discounts

1+ 0%

6+ 5%

20+ 10%

40+ 15%

60+ 20%

100+ 30%

Part Number RH	Part Number LH	d	d3	B	C1	d1	d2	dk	h	L1	L2	Radial Static Load Fs(daN)	Movement Angle	Weight g	Cost RH	Quantity	Add to Basket	Cost LH	Quantity	Add to Basket
CMM.00.05	CMM.00.05/LH	5	M5	8	6.00	7.70	18	11.112	33	19	42	150	13°	15	£24.13			£32.56
CMM.00.06	CMM.00.06/LH	6	M6	9	6.75	8.90	20	12.700	36	21	46	250	13°	22	£12.50			£16.85
CMM.00.08	CMM.00.08/LH	8	M8	12	9.00	10.40	24	15.875	42	25	54	400	14°	38	£13.47			£18.22
CMM.00.10	CMM.00.10/LH	10	M10	14	10.50	12.90	28	19.050	48	28	62	700	13°	63	£15.93			£21.50
CMM.00.12	CMM.00.12/LH	12	M12	16	12.00	15.40	32	22.225	54	32	70	1000	13°	100	£17.70			£23.91
CMM.00.16	CMM.00.16/LH	16	M16	21	15.00	19.30	42	28.575	66	37	84	1800	15°	195	£24.13			£32.56
CMM20x1.5	CMM20x1.5/LH	20	M20x1.5	25	18.00	24.30	50	34.925	78	45	103	2000	14°	370	£65.40			£91.59

Material
Bearing Surfaces: Steel on bronze
Ball: Bearing Steel 100 Cr6, hardened, ground polished
Inserts: Special bronze cold onto the ball
Housing (Sizes 5-12): Low Carbon Steel
Housing (Sizes 16-20): High Carbon Alloy Steel

Performance
Operating Temp. Range: -30°C to +150°C
Radial Dynamic Load: (Simple) times Static by 0.50
Radial Dynamic Load: (Varied) times Static by 0.25
Axial Loads: Times Static Radial Load by 0.20

Other Info.
Maintenance free.
Wear resistant bearing surfaces.
Low constant rotational resistance.

Bore		Radial Backlash
From (mm)	To (mm)	From µm(0.001)	To µm(0.001)
3	6	5	50
6	10	7	61
10	18	8	75
18	30	10	92
30	35	13	112

Downloads
PDF Documents : Catalogue Page | Full Range of Rod Ends