KBRM KBLM : Female Igubal® Plastic Sliding Bearings
Bearings » Rod Ends »KBRM & KBLM Type : Female Igubal® Plastic Sliding Bearings Rod Ends 2mm-30mm Bores
| Discounts | 1+ 0% | 6+ 5% | 20+ 10% | 40+ 15% | 60+ 20% | 100+ 30% |
| Part Number | d1 E10 | dn | d2 | d3 | d4 | d5 | dk | C1 | B | h1 | I3 | I4 | I5 | I7 | W | Max. Pivot Angle |
Max. Static Tensile Strength | Max Radial Load | Min. Thread Depth (mm) |
Max.
Torque Strength Outer Threading (Nm) |
Max Torque Through Ball | Cost RH Thread |
Quantity | Add to Basket |
Cost LH Thread |
Quantity | Add to Basket |
||||
| RH Thread |
LH Thread |
Short
Term (N) |
Long
Term (N) |
Short
Term (N) |
Long
Term (N) |
Standard (Nm) |
MH (Nm) |
||||||||||||||||||||||||
| KBRM-02 | KBLM-02 | 2 | - | 9 | M2 | 4.0 | 4.6 | - | 3.0 | 4 | 12.5 | 6 | 17 | - | - | SW04 | 30° | 600 | 300 | 60 | 30 | 4 | 0.30 | 1 | 2 | £10.55 |
|
£10.55 |
|
||
| KBRM-03 | KBLM-03 | 3 | - | 13 | M3 | 6.5 | 8.0 | - | 4.5 | 6 | 18.5 | 8 | 25 | - | - | SW06 | 30° | 800 | 400 | 100 | 50 | 5 | 0.50 | 2 | 4 | £10.55 |
|
£10.55 |
|
||
| KBRM-05-M4 | KBLM-05-M4 | 5 | 7.7 | 18 | M4 | 9.0 | 12.0 | 11.10 | 6.0 | 8 | 27.0 | 10 | 36 | 4.0 | 9 | SW09 | 30° | 1000 | 500 | 250 | 125 | 7 | 1.00 | 5 | 12 | £10.55 |
|
£10.55 |
|
||
| KBRM-05 | KBLM-05 | 5 | 7.7 | 18 | M5 | 9.0 | 12.0 | 11.10 | 6.0 | 8 | 27.0 | 10 | 36 | 4.0 | 9 | SW09 | 30° | 1000 | 500 | 250 | 125 | 7 | 0.75 | 5 | 12 | £10.55 |
|
£10.55 |
|
||
| KBRM-06 | KBLM-06 | 6 | 8.9 | 20 | M6 | 10.0 | 13.0 | 12.70 | 7.0 | 9 | 30.0 | 12 | 40 | 5.0 | 10 | SW11 | 29° | 1400 | 700 | 400 | 200 | 8 | 1.50 | 10 | 15 | £10.62 |
|
£10.62 |
|
||
| KBRM-08 | KBLM-08 | 8 | 10.3 | 24 | M8 | 13.0 | 16.0 | 15.80 | 9.0 | 12 | 36.0 | 16 | 48 | 5.0 | 12 | SW14 | 25° | 2100 | 1050 | 700 | 350 | 11 | 10.00 | 12 | 40 | £10.92 |
|
£10.92 |
|
||
| KBRM-10 | KBLM-10 | 10 | 12.9 | 30 | M10 | 15.0 | 19.0 | 19.00 | 10.5 | 14 | 43.0 | 20 | 58 | 6.5 | 14 | SW17 | 25° | 3100 | 1550 | 800 | 400 | 13 | 15.00 | 20 | 50 | £17.04 |
|
£17.04 |
|
||
| KBRM-10F | KBLM-10F | 10 | 12.9 | 30 | M10x1.25 | 15.0 | 19.0 | 19.00 | 10.5 | 14 | 43.0 | 20 | 58 | 6.5 | 14 | SW17 | 25° | 3100 | 1550 | 800 | 400 | 13 | 6.00 | 20 | 50 | £17.04 |
|
£17.04 |
|
||
| KBRM-12 | KBLM-12 | 12 | 15.4 | 34 | M12 | 18.0 | 22.0 | 22.20 | 12.0 | 16 | 50.0 | 22 | 67 | 6.5 | 16 | SW19 | 25° | 3600 | 1800 | 900 | 450 | 15 | 20.00 | 30 | 70 | £14.12 |
|
£14.12 |
|
||
| KBRM-12F | KBLM-12F | 12 | 15.4 | 34 | M12x1.25 | 18.0 | 22.0 | 22.20 | 12.0 | 16 | 50.0 | 22 | 67 | 6.5 | 16 | SW19 | 25° | 3600 | 1800 | 900 | 450 | 15 | 15.00 | 30 | 70 | £14.12 |
|
£14.12 |
|
||
| KBRM-14 | KBLM-14 | 14 | 16.8 | 38 | M14 | 20.0 | 25.0 | 25.40 | 13.5 | 19 | 57.0 | 25 | 76 | 8.0 | 18 | SW22 | 25° | 4000 | 2000 | 1000 | 500 | 17 | 25.00 | 35 | 75 | £15.89 |
|
£15.89 |
|
||
| KBRM-16 | KBLM-16 | 16 | 19.3 | 42 | M16 | 22.0 | 27.0 | 28.50 | 15.0 | 21 | 64.0 | 28 | 85 | 8.0 | 21 | SW22 | 23° | 4200 | 2100 | 1300 | 650 | 19 | 30.00 | 40 | 110 | £17.87 |
|
£17.87 |
|
||
| KBRM-16F | KBLM-16F | 16 | 19.3 | 42 | M16x1.5 | 22.0 | 27.0 | 28.50 | 15.0 | 21 | 64.0 | 28 | 85 | 8.0 | 21 | SW22 | 23° | 4200 | 2100 | 1300 | 650 | 19 | 27.50 | 40 | 110 | £17.87 |
|
£17.87 |
|
||
| KBRM-18 | KBLM-18 | 18 | 21.8 | 46 | M18x1.5 | 25.0 | 31.0 | 31.70 | 16.5 | 23 | 71.0 | 32 | 94 | 10.0 | 23 | SW27 | 23° | 4600 | 2300 | 1600 | 800 | 21 | 45.00 | 45 | 150 | £19.98 |
|
£19.98 |
|
||
| KBRM-20 | KBLM-20 | 20 | 24.3 | 50 | M20x2.5 | 28.0 | 34.0 | 34.90 | 18.0 | 25 | 77.0 | 33 | 102 | 10.0 | 25 | SW30 | 23° | 5400 | 2700 | 2100 | 1050 | 22 | 80.00 | 55 | 200 | £24.18 |
|
£24.18 |
|
||
| KBRM-20F | KBLM-20F | 20 | 24.3 | 50 | M20x1.5 | 28.0 | 34.0 | 34.90 | 18.0 | 25 | 77.0 | 33 | 102 | 10.0 | 25 | SW30 | 23° | 5400 | 2700 | 2100 | 1050 | 22 | 60.00 | 55 | 200 | £24.18 |
|
£24.18 |
|
||
| KBRM-22 | KBLM-22 | 22 | 25.8 | 56 | M22x1.5 | 30.0 | 37.0 | 38.10 | 20.2 | 28 | 84.0 | 37 | 112 | 12.0 | 27 | SW32 | 22° | 7000 | 3500 | 2200 | 1100 | 25 | 75.00 | 60 | 225 | £28.38 |
|
£28.38 |
|
||
| KBRM-25 | KBLM-25 | 25 | 29.5 | 60 | M24x2.0 | 32.0 | 41.0 | 42.85 | 22.0 | 31 | 94.0 | 42 | 124 | 12.0 | 30 | SW36 | 22° | 8800 | 4400 | 2300 | 1150 | 28 | 120.00 | 60 | 260 | £33.55 |
|
£33.55 |
|
||
| KBRM-30 | KBLM-30 | 30 | 34.8 | 70 | M30x2.0 | 37.0 | 50.0 | 50.80 | 25.0 | 37 | 110.0 | 51 | 145 | 15.0 | 35 | SW41 | 22° | 10500 | 5250 | 2500 | 1250 | 34 | 135.00 | 60 | 300 | £45.41 |
|
£45.41 |
|
||
Material
Inner Race: Low friction W300 plastic
Housing: Impact resistant igumid® G long fibre-reinforced polymer
Performance
Lightweight: 20% weight of steel
Dry-running: Self-lubricating
Pressures: Upto 20N/mm2
Temperature Range: -40°C to +80°C Short Term 120°C
Max Sliding Speed: 0.5m/s
Corrosion Resistant: Resistance to weak alkalis/acids as well as to fuels and lubricants.
Features
• Maintenance free, self lubricating
• High strength under impact loads
• Very high tensile strength for varying loads
• Compensation for alignment errors
• Compensation for edge loads
• Resistant to dirt, dust and lint
• Available with metal insert in bore.
Add MH to end of part number. P.O.A.
e.g. KBRM-05MH
Downloads
PDF Documents : Catalogue Page | Technical | Full Range of Rod Ends
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login