Ondrives: Bearings - Bushings - QFM - Flanged Oilite Bushes

QFM : Flanged Oilite Bushes (25-50mm Bores)

Bearings » Bushings »
QFM Type : Flanged Oilite Bushes - Metric ISO2795 : 25mm-50mm Bore Dias.

Designed to fit a H7 housing to run on a f7 Shaft.

Discounts

1+ 0%

10+ 5%

25+ 10%

50+ 15%

100+ 20%

200+ 25%

500+ 30%

1000+ 40%

2000+ 45%

Part Number	Bore Ø	L	ØD	ØF	M	Cost	Quantity	Order
QFM19-30	Ø25	30	32	39	3.5	£9.12
QFM20-20	Ø25	20	30	39	3.5	£7.21
QFM20-25	Ø25	25	30	39	3.5	£7.92
QFM20-32	Ø25	32	30	39	3.5	£10.14
QFM24-20	Ø30	20	38	46	4.0	£9.88
QFM24-25	Ø30	25	38	46	4.0	£11.15
QFM24-30	Ø30	30	38	46	4.0	£13.42
QFM27-25	Ø35	25	45	55	5.0	£14.76
QFM27-35	Ø35	35	45	55	5.0	£19.02
QFM27-40	Ø35	40	45	55	5.0	£21.39
QFM30-25	Ø40*	25	50**	60	5.0	£25.15
QFM30-30	Ø40*	30	50**	60	5.0	£26.44
QFM30-40	Ø40*	40	50**	60	5.0	£28.97
QFM30-50	Ø40*	50	50**	60	5.0	£31.18
QFM32-32	Ø50*	32	60**	70	5.0	£28.18
QFM32-40	Ø50*	40	60**	70	5.0	£30.26
QFM32-50	Ø50*	50	60**	70	5.0	£34.90

* = G8 Tolerance ** = s8 Tolerance

Material
Bronze ISO2795 Sintered

Performance
Static Load: 50N/mm²
Dynamic Load: 15N/mm²
Max. working temp: -9°C to +70°C
Lubrication: Mineral Oil to ISO VG (SAE30)
Recommended Speed Range: 0.3m/s to 5m/s
Limit one Pv factor no greater than 1.8. Pv=(N/mm² x m/s)
Pressure = load N
Projected area (bore x length) mm

Other Info.
Oil filled bronze, self lubricating bearing bush.
Our genuine Oilite bearings are designed to be fitted in H7 housings.
Also available, German DIN 30910 Pt. 3 and French NF505755 A95-77-1

Downloads
PDF Documents : Catalogue Page | Oilite Technical | Full Oilite Bushings Range (Including Technical)