JSM : Plain Iglidur® J Bearings (1.5-12mm Bores)
Bearings » Bushings »JSM Type : Plain Iglidur® J Bearings - 1.5mm-12mm Bore Dias.
| Discounts | 1+ 0% | 10+ 5% | 25+ 10% | 50+ 15% | 100+ 20% | 200+ 25% | 500+ 30% | 1000+ 40% | 2000+ 45% |
| Part Number |
d1* E10 | d2 | b1 (h13) | Running
Clearance with h9 Shaft and H7 Housing |
Cost | Quantity | Add to Basket |
|
| Max. | Min. | |||||||
| JSM0104-02 | +0.014 1.5+0.054 |
4.0 | 2.0 | 0.079 | 0.014 | £3.12 |
|
|
| JSM0205-02 | +0.014 2.0+0.054 |
5.0 | 2.0 | 0.079 | 0.014 | £3.63 |
|
|
| JSM0206-02 | +0.020 2.5+0.080 |
6.0 | 2.5 | 0.079 | 0.014 | £3.49 |
|
|
| JSM0304-05 | +0.020 3.0+0.068 |
4.5 | 5.0 | 0.079 | 0.014 | £POA |
|
|
| JSM0308-04 | +0.020 3.0+0.080 |
8.0 | 4.0 | 0.079 | 0.014 | £6.13 |
|
|
| JSM0308-05 | +0.020 3.0 +0.080 |
8.0 | 5.0 | 0.079 | 0.014 | £6.27 |
|
|
| JSM0405-04 | +0.020 4.0+0.068 |
5.5 | 4.0 | 0.098 | 0.020 | £3.77 |
|
|
| JSM0507-05 | +0.020 5.0 +0.068 |
7.0 | 5.0 | 0.098 | 0.020 | £3.91 |
|
|
| JSM0608-06 | +0.020 6.0 +0.068 |
8.0 | 6.0 | 0.098 | 0.020 | £4.02 |
|
|
| JSM0608-10 | +0.020 6.0 +0.068 |
8.0 | 10.0 | 0.098 | 0.020 | £4.28 |
|
|
| JSM0810-08 | +0.025 8.0+0.083 |
10.0 | 8.0 | 0.119 | 0.025 | £4.28 |
|
|
| JSM0810-10 | +0.025 8.0 +0.083 |
10.0 | 10.0 | 0.119 | 0.025 | £4.43 |
|
|
| JSM0810-12 | +0.025 8.0 +0.083 |
10.0 | 12.0 | 0.119 | 0.025 | £4.56 |
|
|
| JSM0810-16 | +0.025 8.0 +0.083 |
10.0 | 16.0 | 0.119 | 0.025 | £4.82 |
|
|
| JSM1012-05 | +0.025 10.0 +0.083 |
12.0 | 5.0 | 0.119 | 0.025 | £3.77 |
|
|
| JSM1012-08 | +0.025 10.0 +0.083 |
12.0 | 8.0 | 0.119 | 0.025 | £4.43 |
|
|
| JSM1012-15 | +0.025 10.0 +0.083 |
12.0 | 15.0 | 0.119 | 0.025 | £5.07 |
|
|
| JSM1012-20 | +0.025 10.0 +0.083 |
12.0 | 20.0 | 0.119 | 0.025 | £6.13 |
|
|
| JSM1014-16 | +0.025 10.0 +0.083 |
14.0 | 16.0 | 0.119 | 0.025 | £5.61 |
|
|
| JSM1016-10 | +0.025 10.0 +0.083 |
16.0 | 10.0 | 0.119 | 0.025 | £5.74 |
|
|
| JSM1016-16 | +0.025 10.0 +0.083 |
16.0 | 16.0 | 0.119 | 0.025 | £6.78 |
|
|
| JSM1214-08 | +0.032 12.0+0.102 |
14.0 | 8.0 | 0.145 | 0.032 | £4.82 |
|
|
| JSM1214-09 | +0.032 12.0 +0.102 |
14.0 | 9.0 | 0.145 | 0.032 | £4.82 |
|
|
| JSM1214-10 | +0.032 12.0 +0.102 |
14.0 | 10.0 | 0.145 | 0.032 | £4.97 |
|
|
| JSM1214-15 | +0.032 12.0 +0.102 |
14.0 | 15.0 | 0.145 | 0.032 | £5.23 |
|
|
| JSM1214-20 | +0.032 12.0 +0.102 |
14.0 | 20.0 | 0.145 | 0.032 | £5.74 |
|
|
* Tolerance when fitted (Dimensions following DIN 1494). Designed to fit H7 Housing and h7-h9 Shaft.
Material
Iglidur® J Plastic Colour yellow
Performance
Max. Cont. Speed (dry operation) Rotating 1.5m/s. Oscillating 1.5m/s. Linear 8m/s.
Temperature Range -40°C to +100°C Short period 120°C
Ideal Conditions: Load < 2N/mm2 Temp +60°C max
Static Pressure Loads at 20°C 35N/mm2
Max P.V valve during dry operation is 1N/mm2 x m/s
Iglidur® J is designed for dry operation but P.V value is increased with continuous lubrication in oil, grease, water or other liquids.
| Pressure (N) | Rpm / (Bore Ų x  ) |
|||
| (Load) N/mm2 |
|
(Velocity) m/s = |
|
|
| Bore Ų x Length (mm) | 60 |
Co-efficient of friction against steel shaft (50 HRC 0.2µm): Dry: 0.06 - 0.18. Grease: 0.09. Oil/Water: 0.04.
Recommended Running Shaft to be Hard Steel 50 HRC 0.8-2µm Finish
Softer shafts can work well on these bushings.
Moisture Absorption at RH50/23°C = 0.2%. Density: 1.5g/cm3
Downloads
PDF Documents : Catalogue Pages | Iglidur® Bearings Technical | Full Range of Iglidur Bushings
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login