GSM : Plain Iglidur® G Bearing (30-150mm Bores)
Bearings » Bushings »GSM Type : Plain Iglidur® G Bearings - 30mm-150mm Bore Dias.
| Discounts | 1+ 0% | 10+ 5% | 25+ 10% | 50+ 15% | 100+ 20% | 200+ 25% | 500+ 30% | 1000+ 40% | 2000+ 45% |
| Part Number |
d1* E10 | d2 | b1 h13 | Running
Clearance with h9 Shaft and H7 Housing |
Cost | Quantity | Add to Basket |
|
| Max. | Min. | GSM3034-30 | +0.040 30+0.124 |
34 | 30 | 0.176 | 0.040 | £8.54 |
|
| GSM3034-40 | +0.040 30+0.124 |
34 | 40 | 0.176 | 0.040 | £8.54 |
|
|
| GSM3539-20 | +0.050 35+0.150 |
39 | 20 | 0.212 | 0.050 | £9.24 |
|
|
| GSM3539-30 | +0.050 35+0.150 |
39 | 30 | 0.212 | 0.050 | £10.46 |
|
|
| GSM4044-40 | +0.050 40+0.150 |
44 | 40 | 0.212 | 0.050 | £16.50 |
|
|
| GSM4044-50 | +0.050 40+0.150 |
44 | 50 | 0.212 | 0.050 | £20.35 |
|
|
| GSM5055-40 | +0.050 50+0.150 |
55 | 40 | 0.212 | 0.050 | £27.96 |
|
|
| GSM5055-50 | +0.050 50+0.150 |
55 | 50 | 0.212 | 0.050 | £34.73 |
|
|
| GSM6065-40 | +0.060 60+0.180 |
65 | 40 | - | - | £39.29 |
|
|
| GSM6065-50 | +0.060 60+0.180 |
65 | 50 | - | - | £39.29 |
|
|
| GSM7075-60 | +0.060 70+0.180 |
75 | 60 | - | - | £57.15 |
|
|
| GSM7580-60 | +0.060 75+0.180 |
80 | 60 | - | - | £65.87 |
|
|
| GSM8085-100 | +0.072 80+0.212 |
85 | 100 | - | - | £72.95 |
|
|
| GSM8590-100 | +0.072 85+0.212 |
90 | 100 | - | - | £75.15 |
|
|
| GSM9095-100 | +0.072 90+0.212 |
95 | 100 | - | - | £77.28 |
|
|
| GSM95100-100 | +0.072 95+0.212 |
100 | 100 | - | - | £79.48 |
|
|
| GSM100105100 | +0.072 100+0.212 |
105 | 100 | - | - | £81.68 |
|
|
| GSM110115100 | +0.072 110+0.212 |
115 | 100 | - | - | £86.00 |
|
|
| GSM120125100 | +0.072 120+0.212 |
125 | 100 | - | - | £90.39 |
|
|
| GSM125130100 | +0.085 125+0.245 |
130 | 100 | - | - | £92.54 |
|
|
| GSM130135100 | +0.085 130+0.245 |
135 | 100 | - | - | £94.73 |
|
|
| GSM140145100 | +0.085 140+0.245 |
145 | 100 | - | - | £99.12 |
|
|
| GSM150155100 | +0.085 150+0.245 |
155 | 100 | - | - | £103.45 |
|
|
* Tolerance when fitted (Dimensions following DIN 1494). Designed to fit H7 Housing and h7-h9 Shaft.
Material
Iglidur® G Plastic
Performance
Max. Continuous Speed: (dry operation) Rotating 1m/s Oscillating 1.5m/s Linear 4m/s
Temperature Range: -40°C to +130°C Short period 220°C
Static pressure loads at: 130°C 60N/mm2 50°C 70N/mm2 20°C 80N/mm2
Max P.V valve during dry operation is 1N/mm2 x m/s
Iglidur® G is designed for dry operation but P.V value is increased with continuous lubrication in oil, grease, water or other liquids.
| Pressure (N) | Rpm / (Bore Ų x  ) |
|||
| (Load) N/mm2 | (Velocity) m/s = | |||
| Bore Ų x Length (mm) | 60 |
Co-efficient of friction against steel shaft (50 HRC 1µm): Dry 0.09 - 0.22 Grease 0.09 Oil/Water 0.04
Recommended Running Shaft: Hard Steel 50 HRC 0.8-2µm Finish
Downloads
PDF Documents : Catalogue Pages | Iglidur® Bearings Technical | Full Range of Iglidur Bushings
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login