GFM : Flanged Iglidur® G Bearings (35-150mm Bores)
Bearings » Bushings »GFM Type : Flanged Iglidur® G Bearings - 35mm-150mm Bore Dias.
| Discounts | 1+ 0% | 10+ 5% | 25+ 10% | 50+ 15% | 100+ 20% | 200+ 25% | 500+ 30% | 1000+ 40% | 2000+ 45% |
| Part Number |
d1* E10 |
d2 | d3 d13 | b1 (h13) | b2 (-0.14) | Running Clearance with h9 Shaft and H7 Housing |
Cost | Quantity | Add to Basket |
|
| Max. | Min. | |||||||||
| GFM3539-26 |
+0.050 35+0.150 |
39 | 47 | 26.0 | 2.0 | 0.212 | 0.050 | £11.31 |
|
|
| GFM4044-40 |
+0.050 40+0.150 |
44 | 52 | 40.0 | 2.0 | 0.212 | 0.050 | £18.43 |
|
|
| GFM5055-40 |
+0.050 50+0.150 |
55 | 63 | 40.0 | 2.0 | 0.212 | 0.050 | £30.12 |
|
|
| GFM5055-50 |
+0.050 50+0.150 |
55 | 63 | 50.0 | 2.0 | 0.212 | 0.050 | £34.23 |
|
|
| GFM6065-50 |
+0.060 60+0.180 |
65 | 73 | 50.0 | 2.0 | - | - | £48.37 |
|
|
| GFM7075-50 |
+0.060 50+0.180 |
75 | 83 | 50.0 | 2.0 | - | - | £55.48 |
|
|
| GFM7580-50 |
+0.060 75+0.180 |
80 | 88 | 50.0 | 2.0 | - | - | £58.26 |
|
|
| GFM8085-100 |
+0.072 80+0.212 |
85 | 93 | 100.0 | 2.5 | - | - | £90.49 |
|
|
| GFM8590-100 |
+0.072 85+0.212 |
90 | 98 | 100.0 | 2.5 | - | - | £92.64 |
|
|
| GFM9095-100 |
+0.072 90+0.212 |
95 | 103 | 100.0 | 2.5 | - | - | £94.84 |
|
|
| GFM95100-100 |
+0.072 95+0.212 |
100 | 108 | 100.0 | 2.5 | - | - | £97.02 |
|
|
| GFM100105100 |
+0.072 100+0.212 |
105 | 113 | 100.0 | 2.5 | - | - | £99.18 |
|
|
| GFM110115100 |
+0.072 110+0.212 |
115 | 123 | 100.0 | 2.5 | - | - | £103.56 |
|
|
| GFM120125100 |
+0.072 120+0.212 |
125 | 133 | 100.0 | 2.5 | - | - | £107.89 |
|
|
| GFM125130100 |
+0.085 125+0.245 |
130 | 138 | 100.0 | 2.5 | - | - | £110.09 |
|
|
| GFM130135100 |
+0.085 130+0.245 |
135 | 143 | 100.0 | 2.5 | - | - | £112.28 |
|
|
| GFM140145100 |
+0.085 140+0.245 |
145 | 153 | 100.0 | 2.5 | - | - | £116.66 |
|
|
| GFM150155100 |
+0.085 150+0.245 |
155 | 163 | 100.0 | 2.5 | - | - | £121.02 |
|
|
* Tolerance when fitted (Dimensions following DIN 1494). Designed to fit H7 Housing and h7-h9 Shaft.
Material
Iglidur® G Plastic
Performance
Max. Continuous Speed: (dry operation) Rotating 1m/s Oscillating 1.5m/s Linear 4m/s
Temperature Range: -40°C to +130°C Short period 220°C
Static pressure loads at: 130°C 60N/mm2 50°C 70N/mm2 20°C 80N/mm2
Max P.V valve during dry operation is 1N/mm2 x m/s
Iglidur® G is designed for dry operation but P.V value is increased with continuous lubrication in oil, grease, water or other liquids.
| Pressure (N) | Rpm / (Bore Ų x  ) |
|||
| (Load) N/mm2 | (Velocity) m/s = | |||
| Bore Ų x Length (mm) | 60 |
Co-efficient of friction against steel shaft (50 HRC 1µm): Dry 0.09 - 0.22 Grease 0.09 Oil/Water 0.04
Recommended Running Shaft: Hard Steel 50 HRC 0.8-2µm Finish
Downloads
PDF Documents : Catalogue Pages | Iglidur® Bearings Technical | Full Range of Iglidur Bushings
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login