Discounts

1+ 0%

10+ 5%

25+ 10%

50+ 15%

100+ 20%

200+ 25%

500+ 30%

1000+ 40%

2000+ 45%

Part Number	d1* ( E10)	d2	d3 d13	b1 h13	b2 -0.14	Running Clearance with h9 Shaft and H7 Housing		Cost	Quantity	Add to Basket
						Max.	Min.
AFM0103-02	+0.020 1.0+0.080	3	5	2	1.0	0.105	0.020	£2.99
AFM0104-02	+0.020 1.5+0.080	4	6	2	1.0	0.105	0.020	£2.99
AFM0205-03	+0.020 2.0+0.080	5	8	3	1.5	0.105	0.020	£3.28
AFM0206-03	+0.020 2.0 +0.080	6	9	3	1.5	0.105	0.020	£3.28
AFM0306-04	+0.020 2.0 +0.080	6	9	4	1.5	0.105	0.020	£3.28
AFM0408-04	+0.030 4.0+0.105	8	12	4	2.0	0.135	0.030	£3.42
AFM0408-06	+0.030 4.0+0.105	8	12	6	2.0	0.135	0.030	£3.42
AFM0509-05	+0.030 5.0+0.105	9	13	5	2.0	0.135	0.030	£3.56
AFM0509-06	+0.030 5.0+0.105	9	13	6	2.0	0.135	0.030	£3.56
AFM0509-08	+0.030 5.0+0.105	9	13	8	2.0	0.135	0.030	£3.69
AFM0610-04	+0.030 6.0+0.105	10	14	4	2.0	0.135	0.030	£3.56
AFM0610-06	+0.030 6.0+0.105	10	14	6	2.0	0.135	0.030	£3.69
AFM0610-10	+0.030 6.0+0.105	10	14	10	2.0	0.135	0.030	£3.69
AFM0612-06	+0.030 6.0+0.105	12	14	6	3.0	0.135	0.030	£3.84
AFM0612-10	+0.030 6.0+0.105	12	14	10	3.0	0.135	0.030	£4.14
AFM0711-08	+0.040 7.0+0.130	11	15	08	2.0	0.166	0.040	£4.14
AFM0811-08	+0.040 8.0+0.130	11	13	08	2.0	0.166	0.040	£4.14
AFM0812-06	+0.040 8.0+0.130	12	16	06	2.0	0.166	0.040	£3.84
AFM0812-08	+0.040 8.0+0.130	12	16	08	2.0	0.166	0.040	£4.14
AFM0812-12	+0.040 8.0+0.130	12	16	12	2.0	0.166	0.040	£4.43
AFM0814-06	+0.040 8.0+0.130	14	18	06	3.0	0.166	0.040	£4.14
AFM0814-10	+0.040 8.0+0.130	14	18	10	3.0	0.166	0.040	£4.14
AFM0914-06	+0.040 9.0+0.130	14	19	06	2.0	0.166	0.040	£4.14
AFM0914-10	+0.040 9.0+0.130	14	19	10	2.0	0.166	0.040	£4.14
AFM0914-14	+0.040 9.0+0.130	14	19	14	2.0	0.166	0.040	£4.26
AFM10162010	+0.040 10.0+0.130	16	20	10	3.0	0.166	0.040	£4.57
AFM1016-08	+0.040 10.0+0.130	16	22	8	3.0	0.166	0.040	£4.43
AFM1016-10	+0.040 10.0+0.130	16	22	10	3.0	0.166	0.040	£4.71
AFM1016-16	+0.040 10.0+0.130	16	22	16	3.0	0.166	0.040	£4.71
AFM1218-08	+0.050 12.0+0.160	18	24	8	3.0	0.203	0.050	£4.57
AFM1218-10	+0.050 12.0+0.160	18	22	10	3.0	0.203	0.050	£4.71
AFM1218-12	+0.050 12.0+0.160	18	24	12	3.0	0.203	0.050	£4.71
AFM1218-15	+0.050 12.0+0.160	18	22	15	3.0	0.203	0.050	£5.00
AFM1218-20	+0.050 12.0+0.160	18	22	20	3.0	0.203	0.050	£5.00
AFM1420-10	+0.050 14.0+0.160	20	25	10	3.0	0.203	0.050	£5.00
AFM1420-15	+0.050 14.0+0.160	20	25	15	3.0	0.203	0.050	£5.29
AFM1420-20	+0.050 14.0+0.160	20	25	20	3.0	0.203	0.050	£5.42
AFM1521-10	+0.050 15.0+0.160	21	27	10	3.0	0.203	0.050	£5.00
AFM1521-15	+0.050 15.0+0.160	21	27	15	3.0	0.203	0.050	£5.29
AFM1521-20	+0.050 15.0+0.160	21	27	20	3.0	0.203	0.050	£5.42
AFM1521-25	+0.050 15.0+0.160	21	27	25	3.0	0.203	0.050	£5.73

* Tolerance when fitted (Dimensions following DIN 1494). Designed to fit H7 Housing and h7-h9 Shaft.

Material
Iglidur® A200 Plastic Colour white. Strong chemical resistance. FDA approved. UV resistant.

Performance
Max. Cont. Speed: (dry operation) Rotating 0.8m/s Oscillating 0.8m/s Linear 2m/s
Temperature Range: -40°C to +80°C Short period +170°C
Static pressure loads: at 20°C 18N/mm²
Max P.V valve: during dry operation is 0.1 max (N/mm² x m/s)
Iglidur® A200 is designed for dry operation but P.V value is increased with continuous lubrication in oil, grease, water or other liquids.

	Pressure (N)			Rpm / (Bore Ų x )
(Load) N/mm2			(Velocity) m/s =
	Bore Ų x Length (mm)			60

Co-efficient of friction against steel shaft (50 HRC 0.2µm) Dry 0.10 - 0.40 Grease 0.09 Oil/Water 0.04.
Recommended Running Shaft: to be Hard Steel 50 HRC 0.8-2µm Finish
Moisture Absorption: at RH50/23°C = 1.5%. Saturation in Water = 7.6%
Density: 1.14g/cm³

Downloads
PDF Documents : Catalogue Pages | Iglidur® Bearings Technical | Full Range of Iglidur Bushings