Ondrives: Bearings - Bearing Units - KSTM KGLM 5-30mm Bores

KSTM KGLM : 5-30mm Bores

Bearings » Bearing Units »
KSTM & KGLM Type : Igubal® Plastic Sliding Bearings Pillow Block & Spherical 5mm-30mm Bores

KSTM & KGLM Type : Igubal® Plastic Sliding Bearings Pillow Block & Spherical 5mm-30mm Bores

Discounts

1+ 0%

6+ 5%

20+ 10%

40+ 15%

60+ 20%

100+ 30%

Part Number	a	d1 (E10)	B	C1	h1	h2	m	d3	X2	Max Pivot Angle	Max Static Tensile Strength Short Term N	Max Static Tensile Strength Long Term N	Max Static Compressive Strength N	Max Torque Longitudinal Holes Nm	Cost	Quantity	Add to Basket
PEDESTAL
KSTM-05	34	5	8	6.0	7	14	25	3.3	5	30º	700	350	500	0.6	£9.55
KSTM-06	43	6	9	7.0	10	20	33	4.5	6	29º	1100	550	700	1.3	£9.66
KSTM-08	47	8	12	9.0	10	20	33	4.5	7	25º	1300	650	1000	1.3	£9.88
KSTM-10	62	10	15	10.5	14	28	46	5.5	8	25º	1500	750	1100	2.5	£10.95
KSTM-12	65	12	16	12.0	14	28	46	5.5	9	25º	2200	1100	1150	2.5	£12.95
KSTM-14	82	14	19	13.5	18	36	60	6.6	11	23º	2400	1200	1200	4.5	£14.71
KSTM-16	86	16	21	15.0	18	36	60	6.6	12	23º	3000	1500	1800	4.5	£16.47
KSTM-18	93	18	23	16.5	22	44	68	9.0	13	23º	3500	1750	1900	10.5	£20.94
KSTM-20	98	20	25	18.0	22	44	68	9.0	14	23º	4700	2350	2500	10.5	£23.14
KSTM-22	108	22	28	20.0	24	48	74	9.0	16	22º	6100	3050	2700	10.5	£27.09
KSTM-25	124	25	31	22.0	27	54	86	9.0	17	22º	6600	3300	3200	10.5	£31.50
KSTM-30	139	30	37	25.0	32	64	96	11.0	20	22º	8100	4050	3750	21.5	£41.83

Part Number	d1 (E10)	d2	Ball ØE	C	dn	dk	Cost	Quantity	Add to Basket
PIVOTING
KGLM-05	5	13	8	6.0	7.7	11.1	£7.57
KGLM-06	6	16	9	6.5	8.9	12.7	£7.73
KGLM-08	8	19	12	9.0	10.3	15.8	£7.79
KGLM-10	10	22	14	10.5	12.9	19.0	£8.68
KGLM-12	12	26	16	12.0	15.4	22.2	£10.29
KGLM-14	14	28	19	13.5	16.8	25.4	£11.65
KGLM-16	16	32	21	15.0	19.3	28.5	£13.14
KGLM-18	18	35	23	16.5	21.8	31.7	£14.71
KGLM-20	20	40	25	18.0	24.3	34.8	£16.93
KGLM-22	22	42	28	20.0	25.8	38.1	£19.89
KGLM-25	25	47	31	22.0	29.5	42.8	£24.05
KGLM-30	30	55	37	25.0	34.8	50.8	£32.51

Material
Inner race: Low friction W300 plastic
Housing: Impact resistant igumid® G long fibre-reinforced polymer

Performance
Lightweight 20% weight of steel
Dry-running: Self-lubricating
Pressures: Upto 20N/mm²
Temperature Range: -40°C to +80°C Short Term 120°C
Max Sliding Speed: 0.5m/s
Corrosion Resistant: Resistance to weak alkalis/acids as well as to fuels and lubricants.
E10 is tolerance limit on bore.

Downloads
PDF Documents : Catalogue Page | Technical