Ondrives: Bearings - Ball Sockets - RAS - Steel Ball & Socket Joints

RAS : Steel Ball & Socket Joints

Bearings » Ball Sockets »
RAS Type : Steel Ball & Socket Joints - Left & Right Handed M5-M16

RAS Type : Steel Ball & Socket Joints - Left & Right Handed M5-M16

Discounts

1+ 0%

6+ 5%

20+ 10%

40+ 15%

60+ 20%

100+ 30%

Part Number		d1	d2	d2b RH / LH	d3	L	a	e	I4	I2	L3	R	Weight g	Cost RH Thread	Quantity	Add to Basket	Cost LH Thread	Quantity	Add to Basket
RH Thread	LH Thread	d1	d2	d2b RH / LH	d3	L	a	e	I4	I2	L3	R	Weight g	Cost RH Thread	Quantity	Add to Basket	Cost LH Thread	Quantity	Add to Basket
RAS5	RAS5L	8	M5	M5	8	28.5	22	10.5	25.0	10	9	6.4	15.2	£3.21			£4.70
RAS6	RAS6L	10	M6	M6	10	32.5	25	11.5	30.0	12	11	7.5	25.2	£3.46			£5.27
RAS8	RAS8L	13	M8	M8	13	39.5	30	14.0	38.0	16	13	9.7	53.1	£4.83			£6.57
RAS10	RAS10L	16	M10	M10	16	47.0	35	15.5	47.5	19	16	12.0	103.8	£7.29			£10.00
RAS12	RAS12L	16	M12	M12	16	47.0	35	15.5	47.5	19	16	12.0	103.8	£9.19			£14.42
RAS14x1.5p	-	19	M14x1.5	M14x1.5	22	-	45	21.5	-	27	20	-	220.9	£14.16			-	-	-
RAS14x2p	-	19	M14x2.0	M14x2.0	22	-	45	21.5	-	27	25	-	220.9	£15.43			-	-	-
RAS16	-	19	M16	M16	22	-	45	21.5	-	27	25	-	220.9	£18.65			-	-	-

Material
Male Ball: Carbon Steel 55HRC Female Housing: Steel 9 SMn Pb28
Spring Clip: Spring Steel Zinc passivated finish.

Performance
Tensile Strength Housing: Rm=500 N/mm²Ball Stud: Rm=600 N/mm²

Other Info.
Induction hardened balls to resist wear (steel version only)
Security clips retain the threaded ball studs in their sockets
Spanner flats can be provided on the stud and socket to order (P.O.A.)
Max Static push-pull values are valid for both radial and axial loads.

Size	SW Spanner Flats A/F	Max. Static Push/Pull kg
M5	7	30
M6	8	70
M8	11	150
M10, M12	13	200
M14, M16	16	200

Downloads
PDF Documents : Catalogue Page | Full Range of Ball & Socket Joints