Ondrives: Bearings - Ball Bearings

Ball Bearings


Q6 Type Radial Ball Bearings Steel Single Row 3-50mm Bores	6 & 16 Type Radial Ball Bearings Steel Single Row 10-22mm Bores 25-40mm Bores 45-65mm Bores 70-90mm Bores 95-100mm Bores	S-2RS Type Popular Radial Ball Bearings Stainless ABEC 1 10-40mm Bores	S6 Type Precision Radial Ball Bearings Stainless ABEC 3 1-40mm Bores

SF-ZZ Type Flanged Radial Ball Bearings Precision Stainless ABEC 3 1.5-15mm Bores	6 Type Radial Ball Bearings Extra Small & Miniature 1-5mm Bores 6-9mm Bores	PB Type Plastic Radial Ball Bearings with Glass or Stainless Balls 3-70mm Bores	VA Type V-Seals Nitrile Rubber 2.7-73mm Bores

BE Type Oil Seals DIN 3760 5-25mm Bores	CPS Type Precision Steel Shims DIN 988 3-8mm Bores 9-13mm Bores 14-17mm Bores 18-22mm Bores 25-28mm Bores 30-36mm Bores 37-45mm Bores 45-50mm Bores 52-56mm Bores 60-70mm Bores 75-90mm Bores 95-110mm Bores 120-170mm Bores	PS Type Precision Stainless Shims 2-16mm Bores	FS Type Precision Stainless Spring Washers 2-16mm Bores

Ondrives offer a range of radial bearings. They start with standard metric single row radial ball bearings in steel and are offered in three different types; open, with ZZ metal shields and 2RS two rubber sealed types. They start with a 3mm bore going up to50mm as standard and outside diameters are 8mm to 90mm.

Another version of the radial ball bearing is the popular metric stainless ABEC 1 bearing with contact neoprene seals as standard and start with bores from 10mm to 40mm, with outside diameters ranging from 26mm up to 80mm.

Other radial bearings offered are 440C stainless as standard in ABEC 3 quality and are either open or shielded with metal shields as standard. Sizes range from a tiny 1.0mm bore up to 40mm and outside diameters from 3mm to 62mm. High temperature special greases are available to fill these bearings on request, if required. The maximum obtainable working temperature is 288ºC, but the 440C material is only good up to 300ºC.

A larger range of bearings are available in stainless or steel, plain or thin section, ABEC 5, P5 and ABEC 7 quality. Other grades and inch sizes are available, plus 1.2mm and 1.5mm bores, special retainers, delrin, phenolic crown and full complement. Please contact our technical team to find out more