RMSA : Adjustable
Anti-Vibration » Shock Absorbers »RMSA500-900 Type : Adjustable Shock Absorbers M20-M25
| Discounts | 1+ 0% | 10+ 5% | 25+ 10% | 50+ 15% | 100+ 20% |
| Part Number |
Stroke | A | B | C | D | E | F | d1 | d2 | d3 | d4 | d5 | I1 | I2 | I3 | I4 | AF | AF1 | AF2 | Max
Side Load Angle |
Max. Energy Capacity Nm Per Cycle W3 |
Max. Energy Capacity Nm per Hour W4 |
Effective Weight me Min KG |
Effective Weight me Max KG |
Return Spring Force Min N |
Return Spring Force Max N |
Rod Reset Time(s) |
Unit Weight KG |
Cost | Quantity | Add to Basket |
| RMSA-500 | 19.00 | M20 x 1.5 | 118 | 13.2 | 12 | 11 | 4.6 | 4.8 | 16.8 | 17 | 20.5 | 25 | 6 | 25 | 12 | 8 | 24 | 18 | 22 | 2° | 25 | 45,000 | 2.30 | 226 | 5 | 10 | 0.10 | 0.130 | £99.83 |
|
|
| RMSA-600 | 25.40 | M25 x 1.5 | 143 | 16.5 | 12 | 11 | 4.6 | 6.3 | 22.4 | 23 | 25.5 | 32 | 8 | 45 | 16 | 10 | 30 | 23 | 27 | 2° | 68 | 68,000 | 5.00 | 1 360 | 10 | 30 | 0.20 | 0.310 | £155.63 |
|
|
| RMSA-900 | 40.00 | M25 x 1.5 | 189 | 16.5 | 12 | 11 | 4.6 | 6.3 | 22.4 | 23 | 25.5 | 32 | 8 | 45 | 16 | 10 | 30 | 23 | 27 | 1° | 100 | 90,000 | 14.00 | 2 040 | 10 | 35 | 0.40 | 0.400 | £225.95 |
|
| Part Number |
A Thread |
d6 | Cost | Quantity | Add to Basket |
|
Stop Collars |
|||||
| STC20 | M20 x 1.5 | 25 | £9.45 |
|
|
| STC25 | M25 x 1.5 | 32 | £15.60 |
|
|
|
Mounting Flanges |
|||||
| MF-20 | M20 x 1.5 | - | £20.79 |
|
|
| MF-25 | M25 x 1.5 | - | £25.35 |
|
|
Material
Body: Steel with black oxide finish
Piston Rod: Stainless Steel
Performance
Operating Temperature Range: -12°C to +90°C
Other Info.
Adjustment: The adjustment range is calibrated from 0 to 9. The adjustment knob is locked with a lock screw which must be slackened with a 1.5mm Allen key before carrying out adjustment (take care not to completely remove and lose the lock screw as it is not held captive). After installing the shock absorber, cycle the machine a few times and alter the adjustment so that optimum deceleration is achieved (i.e. no abrupt change in the lead velocity at the beginning or the end of this shock absorber stroke).
These units are self-contained and may be installed in any mounting position. Check effective weight of application falls within range of unit. Integral mechanical stop is built into front end of units. An optional stop collar can be installed with this device if desired.
Downloads
PDF Documents : Catalogue Pages | Technical
Copyright © Ondrives Ltd 2012. All Rights Reserved. Powered By multisys Liaison™ | Login