Ondrives: Anti-Vibration - Linear Decelerators - MA225 - Adjustable

MA225 : M20x1.5 Thread, 19mm Stroke Adjustable

Anti-Vibration » Linear Decelerators »
MA225 : Adjustable (19.0mm Stroke)

MA225 : Adjustable (19.0mm Stroke) Linear Decelerators

Discounts

1+ 0%

10+ 5%

25+ 10%

50+ 15%

100+ 20%

Part Number	Thread	Effective Weight me min. kg max.	Max. Energy Capacity Nm		Return Force N	Rod Reset Time Sec	*Max. Side Load Angle	Weight kg	Cost	Quantity	Add to Basket
			per cycle W3	per hour W4
MA225-M	M20 x 1.5	2.3 - 226	25	45000	5 - 10	0.1	2°	0.13	£111.73

*Maximum side load depends upon application.

Part Number	Description	Cost	Quantity	Add to Basket
250-0207	Locknut	£6.81
250-0410	Stop Collar*	£16.95
250-0380	StopLight Mounting Block	£55.14
250-0353	Universal Mount	£31.82

*Not required when using built-in mechanical stop.

Material
Body: Steel with black oxide finish
Piston Rod: Stainless Steel
Operating Temperature Range:-12°C to +90°C
Velocity Range: 0.15 to 3.66m/sec

Other Info.
Install mechanical stop approx. 0.5 to 1mm before end of absorber stroke.
Integral mechanical stop • Stop collar can be installed if desired.
Self-contained • Units may be mounted in any position.
Adjustment: After installation of the decelerator in the machine, slacken the locking grub screw in the end cap and rotate between the 0 and 9 scale on the bezel (initial hard impact towards 9, and hard impact at end of stroke towards 0). Optimise stroke action and finally retighten locking screw.

Downloads
PDF Documents : Catalogue Page | Technical | MA Range | Full Range of Decelerators (including Technical)