Ondrives: Anti-Vibration - Anti-Vibration Mounts - STC

STC : Isolators for Vibration & Noise

Anti-Vibration » Anti-Vibration Mounts »
STC : Isolators for Vibration & Noise

STC : Isolators for Vibration & Noise

Discounts

1+ 0%

10+ 5%

25+ 10%

50+ 15%

100+ 20%

Part Number	D1	D2	D3	H1	s	H2	Hole C	Rubber Hardness Sh.A	Max. Load N	Deflection at Max. Load N/mm	Spring Rate N/mm	Cost	Quantity	Add to Basket
STC-2845	28	20.6	10	17.5	8	5.6	21	45	350	0.7	500	£POA
STC-2860	28	20.6	10	17.5	8	5.6	21	60	500	0.7	715	£POA
STC-4445	45	31.5	13	25.4	10	10.4	32	45	750	1.2	625	£POA
STC-4460	45	31.5	13	25.4	10	10.4	32	60	1000	1.2	833	£POA
STC-5060	50	34.3	13	35.0	16	13.5	35	60	1500	1.2	1250	£POA
STC-5075	50	34.3	13	35.0	16	13.5	35	75	3300	1.2	2750	£POA
STC-6360	64	41.1	16	45.0	19	15.7	42	60	2500	2.0	1250	£POA
STC-6375	64	41.1	16	45.0	19	15.7	42	75	5000	2.0	2500	£POA
STC-9560	95	60.0	20	60.0	23	25.0	57	60	5000	4.0	1250	£POA
STC-9575	95	60.0	20	60.0	23	25.0	57	75	10000	4.0	2500	£POA

Material
One piece cylindrical Natural Rubber (NR) moulding for maximum resilience and isolation performance,
centrally bonded to a thick wall steel tube.
Generally the top steel washer, lower rebound steel washer and equipment fixing screw are not supplied as standard.

Other Info.
STC is a vibration, shock and noise isolator which has been designed for the secure support of equipment installed in any direction.
Especially suitable for rugged applications, these isolators are used for the cabins and
engines of off-road and agricultural vehicles, for motors, power packs and electrical equipment etc.
The STC is fitted to a supporting frame or chassis by inserting it into a hole having rounded edges and a smooth bore.
The fixing screw is passed through the equipment foot and top washer, through the steel tube and then tightened onto the lower washer with a nut.

Downloads
PDF Documents : Catalogue Page | Technical | Full Range of Anti-Vibration Mounts