Ondrives: Anti-Vibration - Adjustable Hydraulic Dampers - HB-40

HB-40 : 9mm Eye, 40mm Dia Body, 30-10,000N

Anti-Vibration » Adjustable Hydraulic Dampers »
HB-40 : 30N to 10000N

Note: Mounting brackets for this size of damper are available POA.
Please contact our Technical Dept. for further information.

Discounts

1+ 0%

10+ 5%

25+ 10%

50+ 15%

100+ 20%

Part Number	Stroke	Extension L	Max. Compression Force N	Cost	Quantity	Add to Basket
HB-40-100-AA-P	100	275	10000	£362.56
HB-40-150-AA-P	150	375	10000	£371.93
HB-40-200-AA-P	200	475	10000	£386.17
HB-40-300-AA-P	300	675	10000	£409.86
HB-40-400-AA-P	400	875	8000	£457.29
HB-40-500-AA-P	500	1075	6000	£POA
HB-40-600-AA-P	600	1275	4000	£POA
HB-40-700-AA-P	700	1475	3000	£POA
HB-40-800-AA-P	800	1675	3000	£POA

Material
Piston Rod: Hard chrome plated. Body: Powder coated steel.
End Fittings: Zinc plated steel. ('Eye' type as standard, see Technical Information for options).

Options
P = Damping in both stroke directions (Standard)
M = Damping on out stroke only (Available on Request)
N = Damping on in stroke only (Available on Request)

Damping in both stroke directions as standard.
Damping on out stroke, or in stroke only, available on request.
Rod shrouds are also now available.
End fittings are glued on as standard. If you require the end fittings to be separate, please contact Sales.

Hydraulic Dampers: are self-contained and maintenance free.
Adjustment: adjustment of the damping rate is achieved by pulling (or pushing) the piston rod to its fully extended (or compressed) position. Whilst still pulling the piston rod turn it clockwise to increase damping or anti-clockwise to decrease damping. This adjustment can add a max. of 6mm to the L dim. shown.
Travel Speed: is adjustable and remains constant throughout the stroke.
Free Travel: construction of standard damper results in a free travel of approx. 20% of total stroke when changing travel direction.
Mechanical Stops: provide mechanical stops 1 to 1.5mm before end of each stroke direction.
Operating Temperature Range: -20°C to +80°C.
Operating Fluid: hydraulic oil
Mounting Position: can be mounted in any position.

Downloads
PDF Documents : Catalogue Page | Technical | Full Range of Dampers (including Technical)